Table of Contents
Advertisement
Quick Links
Thank you for purchasing the SpitJack XB125C Rotisserie. All our products are designed and constructed to give
you years of reliable service if used correctly and kept adequately maintained. Please read over the material
below before assembling or using the product. There are some important notes, tips and
in that will help you in using the XB125C safely and effectively.
The XB125C is packed in a single box. Please check that the box has not been damaged and that all the parts
listed below are accounted for. The numbers after each item [bold, in brackets] refer to the illustration
below.
Base assembly parts and hardware]
Base units (X-style) (2) [1]
●
Support posts (2)[2]
●
Remote spit support bracket (1)[3]
●
SpitJack XB125C Rotisserie User Manual
Version 03/2021
List of parts
1
safety cautions
mixed
Advertisement
Table of Contents
Related Manuals for SpitJack XB125C
Summary of Contents for SpitJack XB125C
- Page 1 List of parts The XB125C is packed in a single box. Please check that the box has not been damaged and that all the parts listed below are accounted for. The numbers after each item [bold, in brackets] refer to the illustration below.
- Page 2 Spit assembly hardware (2 hex head bolts and 2 hex nuts) [8] ● Accessories and other components The XB125C comes with a trussing hardware & accessory package included. Below is a list and illustration of the current accessory package. Binding clamps [A] ●...
-
Page 3: Rotisserie Assembly
In addition, there are accessories and other products that you can order separately for your XB125C. If you have ordered them with the XB125C, they may be included in the box (but not pictured above) or come in a separate package. - Page 4 7. Secure it at the second hole from the top of the post with one support post lock pin. [4b]. The second hole is an arbitrary selection. You may adjust the height to your specific needs, although we caution against using the highest setting if you have a large, unbalanced load. Final assembly procedure 1.
-
Page 5: Operating The Rotisserie
SpitJack suggests both trussing the whole length of the meat at intervals with butcher’s twine and using the included binding clamps on the fore and hindquarters as a backup. It’s also a good idea to sew up the belly, even... -
Page 6: Maintenance
Store in a dry place until the next use. Cover the motor assembly if possible to prevent dust and dirt accumulation. Rust protection Most of the XB125C is stainless steel and will not rust of cared for properly. Some of the hardware may show some corrosion and slight rusting over time. Motor... -
Page 7: Hardware Specifications
3. Occasionally oil the drive shaft with some 10W-40. Hardware specifications If you need to order hardware for your XB125C, either ask for the following at your local hardware store or parts dealer, online at McMaster-Carr.com, or BoltDepot.com. Call us if you have trouble finding parts. - Page 8 Disconnect the power immediately if any unusual sound or odors or smoke are coming from the motor. Fire, heat and burn hazard: Since you will need a large heat source to use the XB125C, special precautions must be taken to prevent harm to yourself, other people, the environment, property, and the equipment.
- Page 9 LIMITED WARRANTY. Rasa Incorporated, d/b/a/ SpitJack (the “Company”) warrants that (a) its SpitJack XB125C (the “Product”) will perform substantially in accordance with the accompanying written materials for a period of one year from the date of receipt and (b) that the components of the Product is contained will be free from defects in materials and workmanship under normal use and service for a period of one (1) year.
Need help?
Do you have a question about the XB125C and is the answer not in the manual?
Questions and answers