Advertisement
INSTRUCTIONS
•
Do not over inflate. This is the major cause of leaks.
•
Do not inflate using an air compressor or other high-pressure pump.
•
This item is designed to handle a high volume of air but at low pressure.
•
Read the warnings and instructions printed in this manual for proper inflation and
safe use.
•
All set up including inflation should be done under adult supervision.
•
Do not place the product near fire or other heat sources.
•
Keep out of direct sunlight when not in use.
•
This unit is intended for home and family use only and not for use in public areas or
rental homes.
•
Do not allow children to play on the product until fully inflated.
•
Do not over inflate. It should be firm but allow a small depression when pushed on
with a hand.
•
Do not drag across concrete, cement, pavement, or other rough surfaces. Unfold
the inflatable flat on a clean and smooth surface, free of debris and sharp objects.
Inflation/Deflation
•
Remove the valve plug from the valve and insert the appropriate attachment of the
inflation device. Inflate the mattress to 100% capacity or until almost firm.
•
Close valve by inserting the stem valve plug into the valve and press firmly into
place until the valve is flush with the tube.
Advertisement
