Advertisement
SAFETY & WARNINGS
WARNING:
assembling and using the product. Failure to follow these instructions
can result in serious injury or death.
•
Spaces in and around the bed rails may allow young children and infants to
become trapped, presenting the risk of suffocation or strangulation.
•
Never use with children below two years of age.
•
Never use as a substitute for a crib.
•
Never use unless the bed rail is tight against the mattress and at least 9 inches
from the headboard and footboard. Never fill gaps with pillows, blankets or other
items that can suffocate children.
•
Never use on a toddler bed, bunk bed, waterbed, or bed with inflatable mattress.
Use only on an adult bed with a mattress and mattress support as defined by the
manufacturer.
•
Discontinue use if damaged, broken or if parts are missing.
•
Set up of the product and supervision of use must be conducted by an adult.
•
This product is not a life-saving device.
•
Ensure the product is correctly set up before use.
Notes:
•
Always consider the temperature of the air going into the product and the outside
air. If the inflator is sending warm air into the product when it cools, it may seem like
the product is losing air. This is normal. The product should be firm when
completely inflated but allow a small depression when pushed on with a hand
while in use. Proper inflation should be checked often if the product is to be left
inflated for several consecutive days.
•
To deflate the unit, uncap the valve to allow air to escape quickly and easily. Place
the deflation portion of the inflation/deflation device into the valve and remove all
remaining air. Full deflation will be complete when the unit is flat and wrinkled.
Replace the stem plug back into the valve.
•
Wipe the product off with a terry cloth towel and allow to air dry completely. Store
for next use.
Ensure to read and understand these instructions before
Advertisement
