Technical Data - MADER BM20-50 Operating Instructions Manual

--------------------------------------------------------------------------------------------------------------
MAINTENANCE
Warning:
Before maintenance operation, stop the air compressor, disconnect the unit
from the mains supply and discharge all air in the air tank.
Daily
1. Check oil level before each use.
2. Drain the condensation from the air receiver.
3. Check for air leaks.
Weekly
1. Remove air filter element and clean or replace as required.
Monthly
1. Inspect non-return valve (clean or replace as required)
Caution: ensure that air the tank is empty for this operation.
2. Manually test the safety valve by pulling the ring.
Three Monthly
1. Change Oil
2. Tighten cylinder head bolts.
3. Clean and check valve assembly, replace gaskets/ valves if worn or damaged.
Recommend compressor oil use SAE30 for temperatures over 10℃ and use SAE10
below 10℃.

TECHNICAL DATA

Power
Speed
Air Capacity
Pressure
Voltage
Support
Oil
Noise Level
MODEL BM20-50
1.5Kw / 2Hp
2850 r.p.m.
186 L/min
8Bar / 116PSI
230V~50Hz
Wheels
Yes
97dB