Instructions For Use - Snailax SL-491 Use & Care Manual

Instructions for use

1. Turn off the massager before replacing another massage head.
2. Your massager comes equipped with 4 attachments (Figure 1). Attach the different heads by
pressing the head until it is totally inserted.(Figure 2), detach the installed massage head by
twisting anti-clockwise and pulling out (Figure 3).
! Note: Always turn off the device while replacing the heads.
Fig.2
3. Turn on the massager by operating the control buttons(insturctions as below)
4. Apply the massager head lightly to the area you wish to treat. Move the unit slowly,
holding it over the targeted area. Treat the area for a short period of time and move to
another area. NEVER treat the same area for longer than 1 minute.
5. To turn the unit off by pressing the power button. For your safety the device will automatically
turn off after 15 minutes of continuous use.
Intensity indicator light
Fig.3
Power/Intensity Button
Press to cycle the intensity
Level 1 to Level 5 and turn off
the device.
Power Indicator light
Turn red when power is low,
Otherwise it'll stay green
3