Eaelec N-Scale GMC CCKW 2 1/2 ton Tanker Truck Assembly Instructions

Download this manual

Assembly Instructions For N-Scale

GMC CCKW 2 ½ ton Tanker Truck

www.eaelec.com

Made in Canada

Decals Printed in the USA

Introduced in April 1943 the canvas covered cab version of the CCKW military

truck replaced the earlier metal closed cab type. Over 155,000 of these trucks were

produced. This kit is the fuel tanker version of the CCKW. This model is available with

or without the winch mounted behind the front bumper.

Parts Included in the kit:

A. 3D printed chassis

B. 3D printed cab

C. 3D printed tanker bed

D. One decal sheet

Required to complete the kit:

Paint - Flat black, flat steel, canvas, glosscoat, dullcoat

and Flat army olive (Testors 1165 or Tamiya XF49)

Glue - Slow setting CA is best.

Tools Required:

1. X-acto knife with a sharp #11 blade.

2. #400 and #600 sandpaper.

WARNING: CHOKING HAZARD

Keep out of reach of small

Note that these ARE NOT TOYS,

AND ARE NOT INTENDED FOR

USE BY CHILDREN UNDER

AGE OF 14. These products are

model railroad equipment and

accessories intended for use by

adults.

Page 1

children!

Page 1 AGE OF 14. These products are model railroad equipment and accessories intended for use by adults. www.eaelec.com Made in Canada Decals Printed in the USA Introduced in April 1943 the canvas covered cab version of the CCKW military truck replaced the earlier metal closed cab type. Over 155,000 of these trucks were produced.
Page 2 Canvas Olive Olive Decal Olive Olive Flat Black When gluing the cab to chassis, front of the cab should extend to red line Right View Decal Olive Top View Flat Steel Canvas Decal Flat Steel Flat Black www.eaelec.com Page 2...