Eaelec TT-Scale Ford Model BB-157 Tow Truck Assembly Instructions

Assembly Instructions For TT-Scale
Ford Model BB-157 Tow Truck
www.eaelec.com
Made in Canada
This is a scale model kit of the 1934 BB
series truck. The BB series was in production
from 1932 to 1934. It was equipped with either
the standard four cylinder or the optional
"flathead" V-8 (this kit depicts the V-8). The BB-
157 indicates the longer wheelbase version
(157") rather than the shorter wheelbase version
(131.5"). This kit is the tow truck version of the
BB-157.
3D printed parts Included in the kit:
A. chassis.
B. cab
C. tow bed
D. hoist
E. tool chest
F. lift frame
G. spare wheels
Also included, a decal sheet and some fine
copper wire.
Required to complete the kit:
Paint - see painting guide on pages 3 & 4).
Glue - Slow setting CA is best.
Tools -
1. X-acto knife with a sharp #11 blade.
2. #400 and #600 sandpaper.
3 Pin vise with #76 drill bit.
WARNING: CHOKING HAZARD
Keep out of reach of small
Note that these ARE NOT TOYS,
AND ARE NOT INTENDED FOR
USE BY CHILDREN UNDER
AGE OF 14. These products are
model railroad equipment and
accessories intended for use by
adults.
B
D
Page 1
children!
Parts In The Kit
A
C
E
G
F