1. Manuals
  2. Brands
  3. Eonboom Manuals
  4. DVR
  5. AHD-FD series
  6. User's installation and operation manual

Eonboom AHD-FD Series User's Installation And Operation Manual

Hide thumbs Also See for AHD-FD Series:
Table of Contents

Advertisement

Quick Links

Download this manual
User's
User's
installation
installation
User's
User's installation
installation and
Important
Safeguards
Important
Important
Important Safeguards
Safeguards and
Safeguards
Do not place heavy objects on the DVR.
Do not let any solid or liquid fall into or infiltrate the DVR
Please brush printed circuit boards,connectors,fans,machine box and so on regularly.Before the dust
cleaning please switch off the power and unplug it.
Do not disassemble or repair the DVR by yourself.Do not replace the components by yourself.
Environment
Environment
Environment
Environment
Please place and use the DVR between 0℃ and 40℃.Avoid direct sunlight.Stay away from heat source.
Do not install the DVR in the damp environment.
Do not use the DVR in smoky or dusty environment.
Avoid collision or strong fall.
Please insure the DVR level installation in a stable workplace.
Please install in ventilated place.Keep the vent clean.
Use within the rating input and output scope.
1 Production Introduction........................................................................................................................................ 4
1.1 Product overview....................................................................................................................................... 4
1.2 Main functions............................................................................................................................................ 4
2 Open-package check and cable connections...................................................................................................5
2.1 Open-package check................................................................................................................................ 5
2.2 Hard disk installation................................................................................................................................. 7
2.3 Frame installation...................................................................................................................................... 7
2.4 Front panel............................................................................................................................................... 10
2.5 Rear panel................................................................................................................................................ 10
2.6 Audion and video inprut and output connections................................................................................17
2.6.1 Video input connections.............................................................................................................. 17
2.6.2 Video output connctions asn options........................................................................................ 17
2.6.3 SDI video input............................................................................................................................. 18
2.6.4 Audion signal input.......................................................................................................................18
2.6.5 Audion signal output.................................................................................................................... 18
2.7 Alarm input and output connections..................................................................................................... 18
2.7.1 Alarm input port specification..................................................................................................... 20
2.7.2 Alarm output port specification................................................................................................... 21
All manuals and user guides at all-guides.com
and
and
and operation
and
Warding
and Warding
and
Warding
Warding
Directory
Directory
Directory
Directory
第 1页
operation
operation
Manual
Manual
operation Manual
Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AHD-FD Series and is the answer not in the manual?

Questions and answers

Related Manuals for Eonboom AHD-FD Series

Summary of Contents for Eonboom AHD-FD Series

  • Page 1: Table Of Contents

    All manuals and user guides at all-guides.com User's User's installation installation operation operation Manual Manual User's User's installation installation and and operation operation Manual Manual Important Safeguards Warding Important Important Important Safeguards Safeguards Safeguards and and Warding Warding Warding Do not place heavy objects on the DVR. Do not let any solid or liquid fall into or infiltrate the DVR Please brush printed circuit boards,connectors,fans,machine box and so on regularly.Before the dust cleaning please switch off the power and unplug it.
  • Page 2 All manuals and user guides at all-guides.com 2.7.3 Alarm output port relay parameters................... 21 2.8 Speed dome connections........................21 3 Basic operation..............................22 3.1 Turn on..............................22 3.2 Turn off..............................23 3.3 System login.............................23 3.4 Preview..............................24 3.5 Desktop shortcut menu...........................24 3.5.1 Main menu.............................25 3.5.2 Playback............................
  • Page 3 All manuals and user guides at all-guides.com 4.5.2 Account............................82 4.5.3 Online user............................85 4.5.4 Output adjust..........................86 4.5.5 Auto maintain..........................86 4.5.6 Restore............................86 4.5.7 Upgrade............................87 4.5.8 Device Info............................ 87 4.5.9 Import/Output..........................87 4.6 Info................................88 4.6.1 HDD info............................88 4.6.2 BPS..............................89 4.6.3 Log..............................89 4.6.4 Version............................

  • Page 4: Production Introduction

    All manuals and user guides at all-guides.com 1 1 1 1 Production Production Production Production Introduction Introduction Introduction Introduction 1.1 Product Product Product Product overview overview overview overview The series DVR is designed specially for security and defence field which is an outstanding digital surveillance product.

  • Page 5: Open-Package Check

    All manuals and user guides at all-guides.com ·individual real-time video recording as well as searching, playback, network surveillance, recording check, downloading and so on ·multi-playback mode ·zoom at arbitrary region Net operating operating operating operating ·through net tele-surveillance in the real time ·tele-PTZ control ·tele-recording check and real-time playback Alarm...
  • Page 6 All manuals and user guides at all-guides.com The key function specification in the front panel and the interface specification in the real panel ♦ are in the specification. Please check the product type in the front panel whether is accordant with the product type you ♦...
  • Page 7 All manuals and user guides at all-guides.com 2.4 Rear panel T T T T h h h h e e e e r r r r e e e e a a a a r r r r p p p p a a a a n n n n e e e e l l l l o o o o f f f f T T T T s s s s e e e e r r r r i i i i e e e e s s s s Video Input Video Audio Output...
  • Page 8 All manuals and user guides at all-guides.com rear rear panel panel panel of of of of A A A A series series series The rear rear panel series Video Input Video Output Audio Output Audio Input Network RS485 Power 第 8页...
  • Page 9 All manuals and user guides at all-guides.com rear rear panel panel panel of of of of C C C C series series series The rear rear panel series Video Input Video Output Audio Input Audio Network Output RS485 Power Video Input Video 12V Output Output...
  • Page 10 All manuals and user guides at all-guides.com The rear rear rear rear panel panel panel panel of of of of E E E E series series series series 第10页...
  • Page 11 All manuals and user guides at all-guides.com 5004E-S Video Output Audio Input Network External Interface Power Supply Switch Video Output Audio Output 12V Input * * * * rear rear panel panel panel of of of of F F F F series series series The rear...
  • Page 12 All manuals and user guides at all-guides.com Video Input Audio Input Network External Interface Power Supply Switch Video Output Audio Output rear rear panel panel panel of of of of K K K K series series series The rear rear panel series Power Switch Power...

  • Page 13: Rear Panel

    All manuals and user guides at all-guides.com Video Input Audio Input HDMI Network External Power Supply Interface Power Switch Video Audio Output Output Video Input Video HDMI Output Network External Power Power Switch Interface Supply Audio Input Audio Output * * * * this this this series...
  • Page 14 All manuals and user guides at all-guides.com Audio Audio video video input input output output connections connections 2.6 Audio Audio and and video video input input and and output output connections connections 2.6.1 2.6.1 2.6.1 2.6.1 Video Video Video Video input input input input connections...
  • Page 15 All manuals and user guides at all-guides.com configuration). When replace the monitor by the computer display, there are some issues to notice 1、Do not stay in the turn-on state for a long time. 2、Keep the computer display normal working by demagnetizing regularly. 3、Stay away from the electro magnetic Interference.
  • Page 16 All manuals and user guides at all-guides.com * * * * note:T note:T note:T series series have have alarm alarm input/output input/output functions. functions. note:T series series have have no no alarm alarm input/output input/output functions. functions. １..Alarm Alarm Alarm Alarm input...
  • Page 17 All manuals and user guides at all-guides.com (1) alarm input 1,2,3,4 (2) ground (3) RS232 (4) RS485 (5) alarm input 5,6,7,8 (6) ground (7) alarm output sixteen sixteen sixteen sixteen external external external external alarm alarm alarm alarm interface interface interface interface ①⑥⑧alarm input...
  • Page 18 All manuals and user guides at all-guides.com supply) . The grounding of the alarm and the DVR should be shared. The NC port of the alarm sensor must be connected with the DVR alarm input port. The grounding of the power supply and the alarm sensor must be shared when used in external power supply.

  • Page 19: Basic Operation

    All manuals and user guides at all-guides.com the 485 interface of eight external alarm the 485 interface of sixteen external alarm 2.Connect the video line with the DVR video input. 3.Electrify the speed dome 3 3 3 3 Basic Basic operation Basic Basic operation...

  • Page 20: Turn Off

    All manuals and user guides at all-guides.com Suggest using the UPS to protect the power supply under allowable conditions. 3.1 Turn Turn Turn Turn off There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the [turn off the system] option is called soft switch.

  • Page 21: 3.4 Preview

    All manuals and user guides at all-guides.com Picture 3.1 System Login Password Password Password Password protection: protection: protection: protection: If If If If the the password password password password is is is is continuous continuous continuous continuous wrong wrong wrong wrong three three three...
  • Page 22 All manuals and user guides at all-guides.com Shortcut menu in full analog(DVR)/Hybrid(HVR) mode 3.5.1 3.5.1 Main Main menu menu 3.5.1 3.5.1 Main Main menu menu When you login, the system main menu is shown as below. 第 25页...

  • Page 23: Desktop Shortcut Menu

    All manuals and user guides at all-guides.com Picture3.3 Main Menu 3.5.2 3.5.2 3.5.2 3.5.2 Playback Playback Playback Playback There are two methods for you to play the video files in the hard disk. 1、 In the desktop shortcut menu. 2、 Main menu>Record->Playback Note: Note: Note:...
  • Page 24 All manuals and user guides at all-guides.com 【Playback control】See detail in below chart Function Function Function Function Function Function Function Function Play/Pause Backward play Slow forward Fast forward Previous frame Next frame Previous file Next file Round play Full screen Stop Picture 3.5 Playback control key Note:...
  • Page 25 All manuals and user guides at all-guides.com Picture 3.8 Record Mode 【Schedule】Record according to the configuration. 【Manual】Click the all button and the according channel is recording no matter the channel in any state. 【Stop】Click the stop button and the according channel stops recording no matter the channel in any state.
  • Page 26 All manuals and user guides at all-guides.com 3.5.5 3.5.5 3.5.5 3.5.5 PTZ PTZ control control control control *T *T *T *T series series series series no no PTZ PTZ function function function function *PTZ control control is is is is a a a a little little different between...
  • Page 27 All manuals and user guides at all-guides.com 【Set】Enter the function operation menu. 【Page switch】Switch between different pages. Special functions Special Special Special functions functions functions： 1 1 1 1 、Preset Preset Preset Preset Set a location for the preset, calls the preset points, PTZ automatically turns to the setting position 1）Preset option Set a location for the preset, procedure is as follows:...
  • Page 28 All manuals and user guides at all-guides.com Value input blank Picture 3.12 PTZ Control 2 2 2 2 、Cruise Cruise Cruise between between Points Points Cruise between between Points Points Multiple preset points connected cruise lines, call cruise between points, the PTZ run around on the line 1）Cruise Between Points Settings Cruise lines is connected by multiple preset points, setting procedure is as follows:...
  • Page 29 All manuals and user guides at all-guides.com Preset Points Blank Time interval Cruise Button Cruise Line Blank Picture 3.13 Cruise Between Points Settings 2）The Calls of Cruise between Points In Picture 3.10, click Page Shift button, enter PTZ control menu as shown in Picture 3.12. Please input the number of cruise in the value blank, then click Cruise between Points button, PTZ begins to work on the cruise line.
  • Page 30 All manuals and user guides at all-guides.com 2）Scan Calls In Picture 3.10, click Page Shift button, then enter PTZ control menu as shown in Picture 3.12. Please input the number of scan in the value blank , then click Scan button，PTZ begins to work on the scan line .
  • Page 31 All manuals and user guides at all-guides.com 5 5 5 5 、Horizontal Horizontal Horizontal Horizontal Rotating Rotating Rotating Rotating Click Horizontally Rotating button, PTZ begins to rotate horizontally (relative to the original position of the camera). Click the Stop button to stop. 6 6 6 6 、Rotate Rotate Rotate...
  • Page 32 All manuals and user guides at all-guides.com parameters include: tonality, brightness, contrast, saturation. You can set different parameters at different time sections. Picture 3.18 Color Setting 3.5.7 3.5.7 3.5.7 3.5.7 Output Output Output Output Adjust Adjust Adjust Adjust *Hybrid mode mode is is is is with with black...
  • Page 33 All manuals and user guides at all-guides.com menu]. Picture 3.20 Logout/Shutdown/Reboot the system 【logout】Quit the menu. Offer password next entrance. 【shut down】Quit the system. Turn off the power supply. When press the shut down button, there is schedule hint. After three seconds, the system is shut down.
  • Page 34 All manuals and user guides at all-guides.com Preview in single window/four windows/sixteen windows according to your choice. Note Note Note Note：Different Different Different Different video video video video input input input input number number number number have have have have different different different different preview...

  • Page 35: Main Menu

    All manuals and user guides at all-guides.com 4 4 4 4 Main Main Main Main menu menu menu menu 4.1 Main Main Main Main menu menu menu menu navigation navigation navigation navigation Main Main Main Main menu menu menu menu Sub menu menu menu...
  • Page 36 All manuals and user guides at all-guides.com Set algorithm rule: trajectory display、sensitivity、minimum pixel、alert Intelligent mode， and setting linkage parameters:period、 alarm output、 the screen analysis prompt、record、PTZ、tour、buzzer、EMAIL、FTP upload. Note Note Note Note: : : : 6000 6000 6000 6000 series series series series support support support...

  • Page 37: Output Adjust

    All manuals and user guides at all-guides.com Set channel mode, check channel status and configure the digital Digital channel, etc. Note Note only only 6000 6000 series series support support Note Note：only only HVR HVR and and 6000 6000 series series support support Hard disk...
  • Page 38 All manuals and user guides at all-guides.com Logout, shut down or reboot Note Note Note Note：T T T T series series series series have have have have no no shut shut shut shut down down down down Shut down function function function function...

  • Page 39: Playback

    All manuals and user guides at all-guides.com Manual: Manual: Manual: Manual:Click the button and the according channel is recording no matter the channel in any state. Stop: Stop: Stop: Stop:Click the stop button and the according channel stops recording no matter the channel in any state.
  • Page 40 All manuals and user guides at all-guides.com Picture 4.2 Backup 【Detect】Detect the storage connected with the DVR such as hard disk or universal disk. 【Backup】Click backup button and the dialog box is popped up. You can choose the backup file according to the type, channel and time.
  • Page 41 All manuals and user guides at all-guides.com Backup Backup Backup Backup format format format format：configurate the backup file format,according to require,can choose Start/pause Start/pause Start/pause Start/pause：Click the play button to start the backup and click the pause button to stop the backup.

  • Page 42: 4.3 Alarm

    All manuals and user guides at all-guides.com Schedule Schedule Schedule Schedule：Realise snapshot according to record type(regular,detect and alarm)and period Manual Manual Manual Manual：No matter what the present channel is in a state,once choose"manual"button,it will have snapshot at related channels. Stop Stop Stop Stop：No matter what the present channel is in a state,once choose "stop"button,it will stop...
  • Page 43 All manuals and user guides at all-guides.com Video detect in Hybrid mode 【Channel】Choose the set motion detect channel. 【Enable】■ means that the motion detect function is on. 第 46页...
  • Page 44 All manuals and user guides at all-guides.com 【Sensitivity】Choose in the six options according to the sensitivity. Note: Note: Note: Note: Only Only Only Only the the motion motion motion motion detect detect detect detect under under under under hybrid hybrid hybrid hybrid mode mode...
  • Page 45 All manuals and user guides at all-guides.com 【Interval】Only one alarm signal is turned on even there are several motion detect signals in the set interval. 【Alarm output】 Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on. 【Delay】Delay a few moments and stop when the alarm state is turned off.
  • Page 46 All manuals and user guides at all-guides.com Note Note Note Note：FTP upload need be set at [Netservice] 【Buzz】When alarm happens, device will come out with buzz. 4.3.2 4.3.2 Video Video Blind Blind 4.3.2 4.3.2 Video Video Blind Blind When the video image is influenced by the environment such as bad brightness or reaching the set sensitivity parameter, the camera mask function is turned on and the linkage function is turned on.
  • Page 47 All manuals and user guides at all-guides.com 4.3.3 4.3.3 Video Video Loss Loss 4.3.3 4.3.3 Video Video Loss Loss When the equipment can not obtain the channel video signal, the video loss alarm is turned on and the linkage function is turned on. * Same * Same * Same...

  • Page 48: Video Loss

    All manuals and user guides at all-guides.com Video loss in Hybrid(HVR) mode Pic 4.9 Video loss Set method: refer to chapter 4.3.1. Motion detect 4.3.4 4.3.4 4.3.4 4.3.4 Alarm Alarm Alarm Alarm input input input input When the equipment obtains the external alarm signal, the alarm function is turned on. 第...

  • Page 49: Alarm Input

    All manuals and user guides at all-guides.com *Alarm *Alarm *Alarm *Alarm input input input input is is is is the the same same same same between between between between hybrid hybrid hybrid hybrid mode mode mode mode & & & & full full full full digital...
  • Page 50 All manuals and user guides at all-guides.com Set method: refer to chapter 4.3.1. Motion detect 4.3.5 4.3.5 4.3.5 4.3.5 Alarm Alarm Alarm Alarm output output output output Refer to chapter 3.5.4. 4.3.6 4.3.6 4.3.6 4.3.6 Abnormal Abnormal Abnormal Abnormal Analysing and inspecting current software and hardware of the device: When some abnormal events happen,the device will make a relative answer such as show message and buzzer.
  • Page 51 All manuals and user guides at all-guides.com this this this this function function function function is is is is enabled, enabled, enabled, enabled, then then then then video video video video blind blind blind blind is is is is invalid. invalid.
  • Page 52 All manuals and user guides at all-guides.com enter and leave, when the moving object meet preset warning area rules, alarm will be triggered. � � � � Rules Rules Rules Rules click setting setting setting setting， enter rule setting page, right click mouse, choose add, use mouse to fix two or more point, and then connect them to form a line or a irregular region, after that a box of prohibited direction options will come out, choose one of them, right click mouse, click Yes, return to previous page, click Yes, alarm rules setting is finished.
  • Page 53 All manuals and user guides at all-guides.com previous page, click Yes, alarm rule setting if finished. Pic 4.14 rule setting - items care Video Video Video Video diagnosis diagnosis diagnosis diagnosis: : : : � Sensitivity Sensitivity Sensitivity Sensitivity , base on different requirement, there are 3 options in the drop-down box type: there are 8 kinds of detection type: Brightness anomaly detection 、...
  • Page 54 All manuals and user guides at all-guides.com For example example example example： enable video analysis function, algorithm rules is PEA PEA, the alert way in the rule is Cordon Cordon Cordon Cordon, prohibited direction is bidirectional, when a moving object across this warning line, alarm is triggered, see below pic4.16 Pic 4.16 the alarm image regarding one of the video analysis Video Teaching...

  • Page 55: General

    All manuals and user guides at all-guides.com 4.4.1 4.4.1 4.4.1 4.4.1 General General General General Picture 4.17 General setup 【System time】Set the system data and time. 【Date format】Choose the data format: YMD, MDY, DMY. 【Date Separator】Choose list separator of the data format. 【Time Format】Choose time format: 24-hour or 12-hour.
  • Page 56 All manuals and user guides at all-guides.com Picture 4.18 DST (week) Picture 4.19 DST (date) 4.4.2 4.4.2 Encode Encode setup setup 4.4.2 4.4.2 Encode Encode setup setup * * * * only only 6000 series (other products only have analog channel) under Hybrid...
  • Page 57 All manuals and user guides at all-guides.com Picture 4.20 Encode setup Independent channel code setting 【Channel】Choose the channel number. 【Compression】Standard H.264 main profile. 【Resolution】Resolution type:1080P/720P/960H/D1/ HD1/CIF / QCIF. 【Frame Rate】P:1 frame/s~25 frame/s; N: 1 frame/s~30 frame/s 【Bit Rate Type】 You can choose limited code stream or variable code stream. When you choose the variable code stream there are six image quality options.under the limited code stream，you can choose the code stream manually；...
  • Page 58 All manuals and user guides at all-guides.com 4.4.3 4.4.3 4.4.3 4.4.3 Network Network Network Network setup setup setup setup Picture4.21 Network 【Net Card】You can choose cable network card or wireless network card. 【DHCP Enable】Obtain IP address automatically(not suggested) Note Note Note Note：DHCP server is preinstalled.
  • Page 59 All manuals and user guides at all-guides.com 4.4.4 4.4.4 4.4.4 4.4.4 NetService NetService NetService NetService Choose the network service option and click the set button to configure the advanced network functions or double click the service button to configure the parameters. Picture 4.22 NetService 【PPPoE setup】...
  • Page 60 All manuals and user guides at all-guides.com 【NTP setup】 Picture 4.24 NTP The NTP server must be installed in the PC. Enable Enable Enable Enable：Reverse■mean choose，setting can become effective. Host Host computer computer Host Host computer computer IP: IP:Input the IP address installed NTP server. Port: Port: Port:...
  • Page 61 All manuals and user guides at all-guides.com Picture 4.25 EMAIL SMTP server: SMTP SMTP SMTP server: server: server:Email server address. It could be an IP address or domain name. Domain name can be translated only it is the correct DNS configuration. Port: Port: Port:...
  • Page 62 All manuals and user guides at all-guides.com Picture 4.26 IP FILTER 【DDNS】 Picture 4.27 DDNS setup It is the abbreviation of dynamic domain name server. Local Local Local Local domain domain domain domain name name name name：Provide the domain name registered by DDNS. User User name...
  • Page 63 All manuals and user guides at all-guides.com Picture 4.28 FTP setup 【Enable】Click Enable,then all settings will be available 【Server IP】 IP address for FTP server 【Port】 Domain Port of FTP,default 21 【User Name】User name of FTP 【Password】Password of user 【Anonymous】 ：enable anonymous,no need setting user name and password 【Max File Length】Max length for upload files at every packed,default 128M 【Dir Name】...
  • Page 64 All manuals and user guides at all-guides.com [Type] choose "DNS" [Enable]: ■ means it is chosen [Sever IP]: IP address of DDNS server [Port]: Port No. of device, related DDNS server listen port [User name] the user name that device can log in DDNS server [Password] the password related to the user name.
  • Page 65 All manuals and user guides at all-guides.com Picture 4.31 Wireless Config 【Enable】Choose Enable to make all settings available 【Type】Dial type,default AUTO 【Wireless AP】3G access point 【Dial Number】3G Dial Number 【User Name】User name of 3G 【Password】Password of dial user 【IP Address】IP address,got from dial Note Note parts...
  • Page 66 All manuals and user guides at all-guides.com it by mobile 【UPNP】 UPNP protocol is to realize auto port forwarding on router, precondition of using this function is to make sure the UPNP function of router is enabled. Picture 4.33 UPNP 【Enable】Choose Enable to make sure all UPNP settings available 【HTTP】Route will automatically distribute HTTP port for the device,when IE viewing,it need this port...
  • Page 67 All manuals and user guides at all-guides.com Pic 4.34 WIFI configure 【Search】 ：click【search】to search all the available wireless device in current range. 【enable】 ：tick it to enable firstly, then go for further setting. 【auto obtain IP address】 ：tick it to enable, device will auto obtain a WIFI IP. 【SSID】...
  • Page 68 All manuals and user guides at all-guides.com 4.4.5 4.4.5 4.4.5 4.4.5 GUI GUI Display Display Display Display Configure the video output parameters including the front output mode and encode output mode. Front output：In the local preview mode include: channel title, time display, channel display, record status, alarm status, transparency and region cover.
  • Page 69 All manuals and user guides at all-guides.com Pic 4.36 output mode 【Channel Title】Click the channel name modify button and enter the channel name menu. Modify the channel name. The 16 Chinese characters and 25 letters are supportive. 【 Time Display 】 means the selective state. Display the system data and time in the surveillance window.
  • Page 70 All manuals and user guides at all-guides.com Pic 4.37 PTZ configure 【Channel】Choose the dome camera input channel. 【Protocol】Choose the corresponding dome protocol. (PELCOD as an example) 【 Address 】 Set as the corresponding dome address. Default: 1. （ Note ： The address must be consistent with the dome address.）...

  • Page 71: Rs232

    All manuals and user guides at all-guides.com 4.38 RS485 device 【Protocol】choose related protocol of brand model( for example: DaHua)； 【Address】set with corresponding address, default is 1； 【Baud rate】choose bard rate that related device use, default is 115200； 【Data bits】including 5-8 options，default is 8； 【Stop bits】including 2 options, default is 1；...
  • Page 72 All manuals and user guides at all-guides.com Pic 4.39 serial port setting 【Serial Port Function】Common serial port is used to debug and update program or set up specific serial port. 【Baud rate】Choose the corresponding baud rate length. 【Data bits】Include 5-8 options. 【Stop bits】Include 2 options.
  • Page 73 All manuals and user guides at all-guides.com Pic 4.40 tour configure 【interval】Set the patrol switch interval. The set range is 5-120 seconds. 【alarm tour】set the interval to shift alarm tour, range is 5-120 seconds, choose return when alarm ends, when alarm link to tour, system will auto shift to six-view after alarm finished. Remark Remark Remark...
  • Page 74 All manuals and user guides at all-guides.com Channel manage page under all analog(DVR) mode Digital Digital Digital Digital channel: channel: channel: channel: 第 77页...
  • Page 75 All manuals and user guides at all-guides.com Single link page of digital channel Multi-linkage page of Digital channel Pic 4.43 digital channel interface 【Channel】select channel title 【Enable】Open digital channel, tick enable, then can do related settings 【Time Synchronization】Tick it means the time of this channel and device is the same. 【Connection Mode】can be singe connect or multi-ink, multi-link modes can connect to several devices, device will be tour displayed one by one, tour interval can be set, no less then 10s;...
  • Page 76 All manuals and user guides at all-guides.com Pic 4.44 remote channel configure page 【Configure Name】device is with default configure title, user can revise it if necessary； 【Device Type】3 types: IPC、DVR、HVR，user can choose as what you like, default is IPC； 【Protocol】Default is TCP 【...
  • Page 77 All manuals and user guides at all-guides.com Channel Channel Channel Channel Status Status Status Status: : : : channel status is to show the status of all the digital channel When there is what existing, status including Max Resolution, This Resolution, Connection Status. For example: The channel status for 4+2 mode is as below: When a channel is added with device but it is not enable, you will see as below: Channel status interface under full digital(NVR) mode (One of the channel without device)
  • Page 78 All manuals and user guides at all-guides.com Remark: Remark: when when current current resolution resolution resolution is is is is over over over resolution resolution that that channel channel supported, supported, then then Remark: Remark: when when the the current current resolution over the the max...

  • Page 79: Advanced

    All manuals and user guides at all-guides.com Advanced Advanced 4.5 Advanced Advanced Manage tools menu including: HDD manage, account manage, online user, output adjust, auto maintain, upgrade. 4.5.1 4.5.1 4.5.1 4.5.1 HDD HDD Manage Manage Manage Manage Configure and manage the hard disk. The menu displays current hard disk information: hard disk number, input port, type, status and overall capability.
  • Page 80 All manuals and user guides at all-guides.com 2. There is no limit in the user and user group. You can add or delete the user group according to user definition. The factory setup include: user\admin. You can set the team as you wish. The user can appoint the purview in the group.
  • Page 81 All manuals and user guides at all-guides.com Pic 4.48 modify password 【Add user】Add a user in the group and set the user purview. Enter the menu interface and input the user name and password. Choose the team and choose whether cover using the user. Cover using means that the account can be used by multiple users at the same time.

  • Page 82: Online User

    All manuals and user guides at all-guides.com Pic 4.50 add group 【Delete User】Delete the current user. Choose the user and click delete user button. 【Delete Group】Delete the current group. Choose the group and click delete group button. Pic 4.51 Delete Group 4.5.3 4.5.3 4.5.3...

  • Page 83: Auto Maintain

    All manuals and user guides at all-guides.com 4.5.4 4.5.4 4.5.4 4.5.4 TV TV adjust adjust adjust adjust Refer to chapter 3.5.7 . 4.5.5 4.5.5 Auto Auto Maintain Maintain 4.5.5 4.5.5 Auto Auto Maintain Maintain The user can set the time to auto reboot and auto delete file. Picture 4.39 Auto maintain 4.5.6 4.5.6...

  • Page 84: Upgrade

    All manuals and user guides at all-guides.com 4.5.7 4.5.7 4.5.7 4.5.7 Upgrade Upgrade Upgrade Upgrade Upgrade Pic 4.55 【Upgrade】choose choose choose choose USB USB interface. interface. interface. interface. 【Upgrade file】choose choose choose choose the the upgrade upgrade upgrade upgrade file. file.

  • Page 85: Info

    All manuals and user guides at all-guides.com 4.57 Import / Export interface Info Info 4.6 Info Info Display the hard disk information, including HDD info, code stream statistic, log info, version info 4.6.1 4.6.1 info info 4.6.1 4.6.1 HDD HDD info info Display the hard disk state: hard disk type, overall capability, residual capability, the recording time and so on.

  • Page 86: Bps

    All manuals and user guides at all-guides.com Pic 4.58 HDD info Tips Tips Tips Tips：○ means that the hard disk is normal. X means that the hard disk is broken-down.- means that there is no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR and take up all the damaged hard disks,then install a new one.

  • Page 87: Version

    All manuals and user guides at all-guides.com Pic: 4.60 Log information 4.6.4 Version 4.6.4 4.6.4 4.6.4 Version Version Version Display the basic information such as hardware information, software version, issue date, serial number , NAT status and so on. Pic 4.61 version information 4.7 Shut Shut Shut...
  • Page 88 All manuals and user guides at all-guides.com Chapter Chapter 5: 5: 5: 5: Cloud Cloud Technology Basic Operation Chapter Chapter Cloud Cloud Technology Technology Technology Basic Basic Basic Operation Operation Operation Cloud Cloud technology technology monitor monitor Cloud Cloud technology technology monitor monitor Cloud technology make the device one step on net, greatly bring convenience for customer to...
  • Page 89 All manuals and user guides at all-guides.com � � � � Log in in in in by user user by user user Customer use their registered user name and password to log in, will see below interface Pic 5.3 cloud technology operation interface Device Device Device...
  • Page 90 All manuals and user guides at all-guides.com Pic 5.4 device manage interface Pic 5.5 add interface at device manage *Remark *Remark *Remark：in in in in pic 5.5, 5.5, user user name name means means user user name name name of of of of monitored monitored monitored device,...
  • Page 91 All manuals and user guides at all-guides.com Pic 5.6 monitor page - log in by user *Remark *Remark *Remark *Remark：the the icon icon icon icon of of of of“ “ “ “ ” ” ” ” means means means means offline, offline, offline, offline, the...
  • Page 92 All manuals and user guides at all-guides.com Pic 5.7 interface of log in by device Input the serial number of device and the verify code to monitor and control the device directly. Pic: 5.8 monitor page - log in by device 第...

  • Page 93: Faq

    All manuals and user guides at all-guides.com 6 6 6 6 FAQ FAQ and and maintenance maintenance maintenance maintenance 6 6 6 6 .1 .1 .1 .1 FAQ If the problems are not listed, please contact the local service or call the HQ service. We are willing to offer the service.
  • Page 94 All manuals and user guides at all-guides.com 4、 There There There There are are no no video video video video outputs outputs outputs outputs in in in in single single single single channel, channel, channel, channel, multiple multiple multiple multiple channels channels channels channels and...
  • Page 95 All manuals and user guides at all-guides.com Possible reasons are as followed: It is not an active tone arm. It is not an active sound box. The audio lines are damaged. The hardware of the DVR is damaged. 9、 There There There There is is is is audio...
  • Page 96 All manuals and user guides at all-guides.com The motion detect area set is not correct. The sensitivity is too low. Limited by some hardware edition. 13、 I I I I can can not not login login login login via via web web or or or or CMS.
  • Page 97 All manuals and user guides at all-guides.com The rewritable machine and the hard disk are shared the same data lines. The data is too much. Please stop recording and backup. The data exceeds the backup storage. The backup equipment is not compatible. The backup equipment is damaged.
  • Page 98 All manuals and user guides at all-guides.com 21、 The storage storage storage storage time time time time is is is is not not enough. enough. enough. enough. Possible reasons are as followed: Front vidicon quality is bad. The lens is too dirty. The vidicon is in backlighting installation. The hard disk capability is not enough.

  • Page 99: Maintenance

    All manuals and user guides at all-guides.com 26、 The snapshot snapshot snapshot snapshot at at at at alarm alarm alarm alarm function function function function was was enable, enable, enable, enable, why why not not catch catch catch catch picture picture picture picture...
  • Page 100 All manuals and user guides at all-guides.com Appendix Appendix Appendix Appendix 1.Remote 1.Remote 1.Remote 1.Remote controller controller controller controller operation operation operation operation Serial Serial Serial Serial Name Name Function Function Name Name Function Function number number number number 1 1 1 1 POWER Power ON/OFF MENU...

  • Page 101: Appendix 2.Mouse Operation

    Digital input Corresponding; All manuals and user guides at all-guides.com 0~9 10+ Channel is magnified in full screen under preview state Short cut Switching of 1/4/8/9/16/24/32Preview mode Alarm reset ALARM CLEAR Clear alarm Device Selection Mute allowed/prohibited Appendix 2.Mouse operation Appendix Appendix Appendix 2.Mouse...
  • Page 102 All manuals and user guides at all-guides.com Appendix 3.Hard disk capability calculation Appendix Appendix Appendix 3.Hard 3.Hard 3.Hard disk disk disk capability capability capability calculation calculation calculation Make sure the hard disk installed to the DVR for the first time. Pay attention to the IDE hard disk lines connection.

Table of Contents