Download Print this page

Polaris PSF 40 RC Manual Instruction page 12

Stand fan with remote control

Advertisement

Available languages

Available languages

IX.
Cleaning and storage
 Switch off and unplug from the power supply before cleaning.
 We recommend the periodic cleaning of this fan by lightly running a vacuum cleaner nozzle over
the fan grill to remove any dust or dirt that may have accumulated inside or on the unit.
 Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan housing.
Before switching on remove the rest of the water using a soft and dry cloth.
 Do not allow water to drip on or into the fan motor housing.
 Don't use sprays.
Attention: To protect against fire or electric shock, do not allow any water to drip on or into the fan.
The motor of the fan was lubricated during the assembling process in the plant. An additional
lubrication while using the appliance is not needed. There is also no need in any technical maintenance
from the user. The repair must be done just by qualified specialists of the service center.
The unit should be kept in a clean and dry place.
X.
Technical information
Power: 55 W
Voltage: 220 V
Frequency: 50 Hz
Set:
1. Base
2. Front grill
3. Back grill
4. Blade lock
5. Blades
6. Nut for grills
7. Axle
8. Base
9. Manual instruction
10. Remote control
Note: Some differences between the user's manual and the article are possible to exist, according to
the permanent process of technological modernization. We do hope that it will not cause you any
inconveniences.
XI.
Guarantee information
The article was certificated under normative documents of Russia.
Projected service life of the article:
Length of warranty:
Manufacturer:
Texton Corporation LLC
1201 Market Street, Wilmington de.19801, State of Delaware, USA
3 years
12 months from the acquisition date.

Advertisement

loading