Advertisement
Quick Links
Wall Hugging
Adjustable BED BASE
#WN7029 OKIN Motor
- 3 Individual Motors for Head-Tilt, Back Incline & foot Incline
- Wall Hugger / Dual Massage / USB Ports / Bluetooth / UnderBed Lighting
- Free APP for Bluetooth Smart Device Controlling ( IOS & Android )
Owner's Manual
4 Massage for QUEEN SIZE
2 Massage for Twin XL Size
CONTENTS
Advisory
Setup and Installation
Wireless Hand Control
1 - 16
GERMAN
Technology
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for OKIN MAXPRIME WN7029
Summary of Contents for OKIN MAXPRIME WN7029
- Page 1 Wall Hugging Technology Adjustable BED BASE #WN7029 OKIN Motor - 3 Individual Motors for Head-Tilt, Back Incline & foot Incline - Wall Hugger / Dual Massage / USB Ports / Bluetooth / UnderBed Lighting - Free APP for Bluetooth Smart Device Controlling ( IOS & Android )
- Page 2 ADVISORY Attention: Read the following information before using this product . Failure to use a surge protection device could compromise safety or cause product malfunction could void the electrical portion of your warranty. - Electrical surges are by far the biggest cause of problems with electrical circuits. In order to help protect your investment in case of a power surge or outage, use an electrical surge protection device (not included).
- Page 3 PACEMAKER WARNING: The massagers in this bed produce mechanical vibrations that may activate a special sensor in your pacemaker that detects motion. This can fool the pacemaker into “thinking” you are engaged in some sort of physical activity and require a faster heart rate and you may experience a sensation similar to when you are exercising.
- Page 4 TO REDUCE THE RISK OF SHOCK, BURNS, FIRE OR INJURY: Make sure the base is in a at position, the vibrating motors are off before unplug from power source. Always unplug the base from the electrical outlet before cleaning or servicing the base. If the cord or plug is damaged, discontinue use of the bed base and contact quali ed service personnel for examination and repair.
- Page 5 SETUP & INSTALLATION Important: We strongly recommend Two able-bodied adults setup and assemble this product. Step 1: Check and verify all parts are included before discarding any packing materials. All electronics and components that need to be installed are located in boxes under the base or attached to the frame.
- Page 6 Step 2: With the help of your able-bodied assistant, place carton on oor with arrows point downwards. Step 3: Install diagram, Overview Please follow Step 3-1 to Stpe 3-5, do not disturb the Steps. Overview 6 - 16...
- Page 7 Step 3-1 Open the Outer Cartons and Place the Rail_Right & Rail_Left to the right side like below Allen Wrench Step 3-2 Install the Connecting Rod. 7 - 16...
- Page 8 Step 3-3 Install the Rail_Head & Rail_Foot. Allen Wrench Step 3-4 Install Pull Rod Wrench Wrench 8 - 16...
- Page 9 Step 3-5 - Install the four legs rmly into the base of the frame. The four legs screw into the threaded holes in each corner of the adjustable base frame. The legs are stackable. The combination give you a set of six 4", 6" or 10" legs. - Note: The minimum leg height:4", The warranty is void if the minimum leg height is not used.
- Page 10 Step 4: Step 5: With the help of your able-bodied assistant , carefully lift the adjustable bed frame and set it in place upright on its legs . Excessive pressure may damage the legs. Remove all protective plastic covering. Note: check and make sure that all power cords clear and do not interfere with any Adjustable Bed Mechanisms;...
- Page 11 Step 7: Scan QR Code to download Free Bluetooth APP “OKIN ComfortBed II”. ( IOS & Android ) GERMAN GERMAN Technology Technology ( Android ) ( IOS version 8.0 and above) How to pair the bed to APP: Please open BLUETOOTH on your phone settings, OKIN ComfortBed II then open the "...
- Page 12 ***** ATTENTION ***** The remote control has already been synchronized and preset during production. Please skip Step 8 unless the remote does not work. Step 8: Synchronize the remote with the control box. First nd the black box mounted under the bed. Double-click the black PAIR button, the Indicator Light of the control box change to blue and the under bed light ashes, At this time, it enters the pairing state.
- Page 13 USING SAME REMOTE The bed base is designed to allow two Twin X-Long bases to become an Split-King base. Owner can use the same remote to control two side-by-side beds bases by Connecting the two control boxes with the SYNC cord (H). Plug one side of the cable into the “SYNC”...
- Page 14 Wireless Remote #WN7029 Wall Hugging Adjustable Bed Base with OKIN Motor 14 - 16...
- Page 15 0-30 DEGREES Individual Head/Pillow Tilt 0-60 DEGREES 0-45 DEGREES Individual Back Incline Individual Foot Incline Wall Hugger Technology up to up to WallHugger Technology to 9inch / 23cm 9inch / 23cm keep you within reach of your night stand/side table up to 9inch / 23cm WHEN TWO BEDS DO NOT ALIGN: on the higher angled bed of the two, use a 19mm wrench to trun the nuts on...
- Page 16 16 - 16...
Need help?
Do you have a question about the MAXPRIME WN7029 and is the answer not in the manual?
Questions and answers