Sandleford 2026.5L Instructions

INSTALLING YOUR SAFE
For installation into concrete surfaces use masonry bolts provided.
1. Install your safe in a location that is secure and sturdy.
2. Drill holes for 12mm masonry bolts in the desired location.
3. Insert the masonry bolts through the holes in the safe and into the concrete.
4. Tighten masonry bolts using a 12mm socket or spanner.
Safe
Concrete
For installation into timber surfaces use coach screws provided.
1. Install your safe in a location that is secure and sturdy.
2. Pre-drill 5mm holes in the desired location.
3. Insert the coach screws through the holes in the safe and into the timber.
4. Tighten coach screws using a socket or spanner.
Safe
Timber
All safes should be bolted down to ensure the best possible security.
OTHER NOTES
- If you wish to clean your safe, use a damp cloth. Do not use liquid or sprayers.
- Never try to dismantle the product by yourself.
- Safe must be installed in an upright position or the warranty shall be void.
A safe is an aid only in reducing theft, it must form only a part of a range of security
measures used. Sandleford Holding Pty Ltd (distributor of Karbon Safes) will not accept or
be held responsible for any loss or damage caused in the event of theft or unauthorised
use.
Ph (03)9786 0055
HOTEL SAFE
INSTRUCTIONS
1. Display
2. Emergency Key Cover
3. Battery Compartment
4. Locking Bolts
Do not store emergency keys inside your safe!
1
2
3
4