Advertisement
Setting up the TV set for the fi rst time
1 Fitting the stand
TV panel must be facing downwards.
For the stand installation, there is
one type of screw provided as shown
below.
To complete the stand installation you
will require a cross head screw driver.
Place the TV set on a fl at and
clean surface with the panel facing
downwards to avoid damage.
4 x
1
Place the TV set on a fl at and clean surface with the
Used for attaching the stand neck
panel facing downwards to avoid damage.
to the TV (fi g.1 to 3)
2 Installing batteries
Remove the battery cover from the rear of the remote control and
insert the AAA batteries which are supplied in the accessory pack.
Ensure that the polarity of the batteries is as shown in the battery
compartment. Replace the battery cover. The remote control is ready
for use.
Sky remote code
If you wish to use your Sky remote to
operate the TV's basic functions, you will
need a Sky remote control (Revision 9 or
later) and you will need to program it
with the code 2134.
If you wish to use your Sky Q remote to
operate the TV's basic functions, you will
need to program it with the code 4170.
USB Record
Retuning your TV
1
This television contains one
tuner, therefore it can only
record the channel you are
To ensure you are receiving the very latest channels on your Television, we suggest that
watching or record one
channel while the television
is in standby mode.
2
Note: USB record function is
only available in Digital/Freeview
TV mode. Due to copyright laws
and illegal copying/recording it
is not possible to recrod to/from
any other input/source.
You will enter the fi rst time installation mode. Follow the onscreen prompts to
3
If you wish to use a USB portable
hard drive larger than 32GB,
please refer to the FAQ section
at the rear of the manual
(available online).
To obtain a copy of your Operating Instructions, please go to: www.umc-uk.co.uk/instruction-manuals/blaupunkt
2
When the stand feet are installed correctly the stand
feet will be longest at the front of the TV and shortest
at the feet pointing away from each other.
3 Connecting your set
1
1
Connect the TV to your power socket.
2
If you wish to use the TV to receive Freeview/Saorview
channels, connect the RF input from the TV to your outdoor
Digital TV aerial. If you do not wish to receive Freeview/
Saorview, skip this step.
First Time Installation
When you fi rst turn on the set, you will be welcomed by the First Time Installation screen as shown above. Once you
have decided the options as described below, select Auto Tuning and press OK.
Language: Select your preferred on-screen display language. This will change the language in which the menus and
associated information is displayed in.
Country: Select the correct country in which the set will be used in. This will enable the TV to correctly install the
functions applicable in the country of use.
Environment: Use this option to select either Home or Store mode.
Home Mode is a power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/
LCD panel). When in STORE MODE the picture will be brighter and you can personalise the settings within the picture
settings menu (Contrast, Brightness, Colour etc.
Note: In Home Mode, the TV will switch itself to the standby mode after 4 hours in the event that the buttons on the
remote control or TV are not used.
Important information - Retuning the TV - Please keep this information to hand.
you retune the set on a monthly basis. This is because channels can be added and/or
moved by the broadcaster.
To retune using the buttons on the remote control:-
Press Menu, then press the number 8 (4 times) so Menu > 8, 8, 8, 8.
retune your set.
3
When the stand feet are in the correct position, secure
the stand feet to the TV set using the 4 screws provided.
4 TV Control Stick
2
The TV control stick is located on the back of the TV.
The control stick can be used to control many of the
TV functions. The shape of the TV's control stick may
vary by model.
While TV is in standby mode:
• Press the centre of the control stick once - Power
on the TV set.
While watching TV:
• RIGHT/LEFT – volume up/volume down.
• UP/DOWN – changes channel up/down.
• Press the centre of the control stick once
– displays the menu.
• Press and hold the centre of the control stick
– Standby/Power Off.
Other functions are described in the manual.
Thank you
Thank you for purchasing this television.
We hope you have many years of trouble
free enjoyment from your purchase.
Your product is covered under the
manufacturers guarantee for 12 months
from the date of purchase.
If you experience any diffi culties with your
TV, please refer to the 'Frequently asked
questions' in the manual.
Please make a note of your TV model, the
serial number and the date of purchase.
You will need this information should you
need to call the helpline.
4 x
Wall Mounting the TV
Image for illustration only.
Connections
A
C
B
A
Earphones
Earphone input
B
LAN*
Network connection
C
Digital audio
Digital optical audio output
D
SCART
SCART input
E
HDMI 1 (ARC)
HDMI input
F
HDMI 2
HDMI input
G
RF in
RF / TV aerial input
* The LAN/Ethernet port is used for Digital TV services.
Register For Your
Regis
Manufa
Manufacturers Warranty
Register your
Register your manufacturers guarantee
online within 14 days of purchase at
online with
www.reg
www.registertv.co.uk/blaupunkt
1. Remove the four screws that are supplied
in the wall mounting holes.
2. The wall mount can now be easily
attached to the mounting holes on
the rear of the TV.
3. Install the wall mounting bracket to the
television as advised by the bracket
manufacturer.
The picture shows the use of spacers, which
are not applicable to all sets/installations.
L
K
J
I
H
D
E
F
G
H
HDMI 3
HDMI input
I
USB x 2
USB port
J
AV in
Audio/video input
K
YPbPr
HD input (Ypbpr)
L
CI card in
Common interface module
Advertisement
