Table of Contents
Advertisement
Quick Links
Before using this unit please read these instructions carefully. Take special care to follow the warnings
indicated on the unit itself as well as the safety suggestions listed below. Keep these instructions for
future reference.
* Please ensure you are familiar and comply with local traffic and driving regulations.
* Power Source - The Mini DVR should be connected to a 12-24 volt DC power supply only.
* Water and Moisture - Do not use the Mini DVR where it may be subject to water ingress or excessive
moisture. Do not use outside the vehicle unprotected.
* Heat - Do not install the Mini DVR near a direct heat sources.
* Ventilation - The Mini DVR should be situated to allow free circulation of air.
* Foreign Material - Care should be taken so that objects do not fall onto or into, and that liquids are
not spilled on the Mini DVR.
* Mounting Surface - The Mini DVR should be mounted to a strong secure surface.
* Replacement Parts - Use only manufacturers replacement specified parts. Unauthorized
substitutions may result in fire risk, electric shock or other hazards and will void the warranty
* Service - The user should not attempt to service this units beyond that described in the operating
instructions. There are no user-serviceable parts within the unit.
* Screen Protective Film - Remove the LCD screen protective plastic cover before use.
* SD Cards - Please format the card before first use. To ensure a good state of health please format the
SD card every 4 weeks. Please ensure all sensitive data is backed up.
Mini Dash Mount DVR with GPS
12/24 Volt
Part 0-776-60
WARNINGS
www.durite.co.uk
0-776-60-LEAF
Advertisement
Table of Contents
Related Manuals for Durite 0-776-60
Summary of Contents for Durite 0-776-60
- Page 1 Mini Dash Mount DVR with GPS 12/24 Volt Part 0-776-60 WARNINGS Before using this unit please read these instructions carefully. Take special care to follow the warnings indicated on the unit itself as well as the safety suggestions listed below. Keep these instructions for future reference.
- Page 2 In standby state, press the <Menu> button to enter the function setting table of the main menu. Press the <REC> or <MIC> button to select the desired option, and press the <OK> button to confirm the se- lected option. After completing the setting, press the <Menu> button to exit the menu setting function. 0-776-60-LEAF www.durite.co.uk...
- Page 3 Press the <MIC> button again to enable the audio-recording function. Then, the MIC indicator is turned on. 6. <Reset> Button If the DVR is crashed, press the <Reset> button to power off the DVR. 0-776-60-LEAF www.durite.co.uk...
- Page 4 To exit the motion detection mode, enter the menu again, and set the state of the <Motion Detection> option to <Off>. If you need to use the motion detection function for a long period, purchase portable power supply separately. 0-776-60-LEAF www.durite.co.uk...
- Page 5 Storage Temperature.........-20°C to +70°C Operating Temperature......-10°C to +60°C Operating Humidity........15% to 65% (RH) Max Memory Card Capacity.....32GB Memory Card..........Micro SD (TF Card) Standard Voltage........DC5V (Output) - 12V/24V (Input) GPS..............YES G Sensor............YES USB Cable Included........YES 12/24V Cigarette Cable/Plug Included..YES Certificate............CE 0-776-60-LEAF www.durite.co.uk...
- Page 6 GPS SOFTWARE IMAGE The image below is to show an example of the features available in the software provided with this mini dash mount DVR. The software shows the location of the vehicle via GPS. It also shows the speed and the G Force upon the vehicle as it travels. There are many features within this software to help analyse any journey recorded by the DVR and could be used as evidence in the event of an accident.
Need help?
Do you have a question about the 0-776-60 and is the answer not in the manual?
Questions and answers