Am Tigers Instruction Manual

Tigers by AM - Instructions Manual
Hi, this short instructions manual will show how to get the most out of the "Tigers by AM"
model.
For convenience, I divided the instructions in two sections, one for Poser users, and
another for Daz users.

General Notes

Please close all un-necessary applications, check that you have a reasonable amount of
free disk space, and that your Poser or Daz Studio is updated to latest version (Daz
version 3.1.1.73 has been optimized to load high polygon count models, so my advice is
that you update to this version).
Also, especially on Windows systems, check your processor usage at idle: it should be
around 5%. If it's much higher than that, you should probably test your system against
spywares or malware.

Poser Users

Once you load the tiger figure (Tiger - Poser.cr2), you can change the fur scheme directly
in the Material Room: you will have to select the "Panthera Tigris" figure and apply the
White Body material (or reverse to the Standard Body material) and do the same for the
Fur figure (White Fur material or Standard Fur material).
In the same way you can change the eyes color to blue or reverse to the standard
yellowish one.
Applying poses is also very easy: just select the "Panthera Tigris" figure and apply any
pose you like.