Advertisement
Cover
Back
Peg
• Position the cover with the quilted side facing away
from the basin.
• Fit the back peg on the cover into the back slot in the
basin.
• Insert and snap the front peg on the cover into the
front slot in the basin.
Mobile
• Position the mobile so that the arched side is up.
• Make sure the areas where the labels will be applied
are clean and dry.
• Apply the labels as indicated in the illustration.
• For best adhesion, try to avoid applying the labels
more than once.
Back Slot
Front Slot
Basin
4
2
5
1
Assembly
Mobile Arm
Front
Peg
Plug
• Insert the plug into the top of the mobile arm.
• Position the mobile so that the label side is toward
the plug.
• Fit and snap the mobile onto the end of the plug.
Slot
3
• Insert and snap the mobile arm into the slot in the top
of the headboard.
5
Label Side
Mobile Arm
Headboard
Mobile
Advertisement
