Jinbei DMII-4 Manual page 27

3) Notes on radio operation
• When using radio remote controls, please note that the radio
channel and (depending on the type of remote control) also the
group must be set identically for correct functioning on the flash
and on the remote control .
• Please note that the radio frequency (2 . 4 GHz) used by these de-
vices is shared with other users / devices . Interference cannot be
ruled out due to this . If necessary, change the radio channel to
avoid interference .
4) Notes on the camera in continuous shooting mode
• When the camera is switched to continuous shooting mode, please
reduce the power output of the flash unit so that the flash char-
ging time keeps up with the continuous shooting speed of the
camera .
5) Notes on overheating protection
• If there is a danger of overheating, the overheating protection on
the flash unit will switch on automatically. Please interrupt your
work immediately and let the flash unit cool down until the "OH"
symbol disappears from the display . You can then continue your
work .
• If the symbol "OF" appears on the display, the flash has switched
off because it has worked over 1000 times continuously at an out-
put power of over 8.0. Again, wait until the flash has cooled down to
continue your work .
Operation
27