Advertisement
Quick Links
Advertisement
Related Manuals for Certa CTVSORBWAXA
Summary of Contents for Certa CTVSORBWAXA
- Page 1 VARIABLE SPEED ORBITAL CAR POLISHER WAXER CTVSORBWAXA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Before operating the polisher, carefully read through and understand all the safety information and warnings in this user guide. Failure to follow all instructions may result in electric shock, fire and/or serious personal injury. Important Information • Always wear eye protection when using any power tool. - Page 4 Personal Safety • Stay alert. Watch what you are doing and use common sense when operating a power tool. Do not operate while tired or under the influence of drugs, alcohol or medication. A moment of distraction while operating power tools may result in serious personal injury.
- Page 5 OVERVIEW Polisher Front handle Power cord Power switch Side handle Variable speed dial Disc Rear handle Accessories Sanding pads (x2) 6” Foam pad 12mm wrench...
- Page 6 ASSEMBLY Side handle • Attach the side handle to the polisher by inserting it into the mounting hole and rotating it in a clockwise direction. • To remove the side handle, rotate it in a counter-clockwise direction. Note: It is recommended to use the side handle at all times to maintain complete control of the tool.
- Page 7 Attaching the foam pad • Before changing pads, ensure the polisher is turned off and unplugged from the power outlet. • Position the disc with the centre of the foam pad and press the pad firmly into the disc. Note: Ensure the foam pad is seated properly before operating the polisher. A poorly positioned pad may result in the pad being thrown from the disc, causing personal injury.
- Page 8 Note: Ensure the sanding pad is seated properly before operating the polisher. A poorly positioned pad may result in the pad being thrown from the disc, causing personal injury. Changing the disc • Before changing the disc, ensure the polisher is turned off and unplugged from the power outlet.
-
Page 9: Operation
OPERATION Before first use: It is very important that the vehicle be clean and dry before applying any wax or polish. Wax protection will wear longer and protect better if applied directly to the paint. Wash the car to remove all dirt and oil using a car wash which had specially formulated to clean the vehicle’s finish. - Page 10 Handling: • The polisher is specially designed to offer ease of use on all areas of the vehicle. • Use the side handle & front handle for bonnet, trunk or side panel areas. • Use the rear handle for roof panels or areas where extra reach is needed. Cord management: •...
- Page 11 NOTES...
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.
Need help?
Do you have a question about the CTVSORBWAXA and is the answer not in the manual?
Questions and answers