Advertisement
Steps:
1. Loosen the protector screw (using a screwdriver) as shown in gure 1.
2. Turning clockwise the adjustor screw to tighten the feeding hopper, shown in
gure 2.
3. Turning counter clockwise the adjustor screw to loosen the feeding hopper,
shown in gure 3.
4. After adjusting the correct level and counting performance is normal, tighten the
protector screw (using a screwdriver), shown in gure 4.
When adjusting the bill thickness adjustor screw does not
solve the problem of improper bill feeding, you may need
further help by.authorized service center.
Hand-hold a note. Put it inside the counting roller and
resistant rubber. (see the picture). To test the tensile force.
Clockwise direction is tighten, counter-clockwise direction is loosing.
10. Counting Roller Replacement
•
When the counting roller damaged, it will cause counting not uently or correct.
•
Open the top cover, loosing the screw of roller axis machine.
•
Replaced old roller. Then x the machine inside.
11. Maintenance
•
Do not operate the unit in areas with high temperature or high humidity since it
may damage the machine.
•
When not using the unit for a long period of time, remove the power plug from
the wall outlet.
•
Never operate the unit under strong light.
•
Clean the machine frequently after switching o and unplugging of the machine.
•
Do not use this product in areas where it may be exposed to water or other liquids.
•
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaner. Use a brush or a damp cloth for Tensile force test. cleaning.
12
www.PyleUSA.com
System Features:
•
Accurate, Reliable & Hassle-Free & Bill Counting
•
Integrated Counterfeit Bank Note Detection
•
Built-in UV (Ultraviolet) Scanning for Bill Authenticity
•
Magnetic (MG), Magnetic Thread (MT), & Infrared (IR) Detection
•
Dual High-Precision Counting Sensors for Accurate Scanning
•
'Add' Function: Continuously Keeps Count of Bills Added
•
'Batch' Function: Process Bills in Designated Amounts
•
Automatic Half-Note & Chain-Note Detection Ability
Tensile force test
•
(2) Counting Modes: Manual and Automatic
•
Top-Loading Bill Feeding Hopper
•
Digital LCD Display Readout
Technical Specs:
•
Counting Speed: Up to 1100 Bills/min
•
Hopper Bill Capacity: 300 Bills
•
Size of Countable Notes: 50mm×100mm/90mm×180 mm
•
Power: 110/220
13
www.PyleUSA.com
Advertisement
