Advertisement
2. General Instruction
To be the latest generation of bill counter, the model is the vanguard of our
evolution in bill counting technology. Its square and stylish design is as remarkable
as its integrated electronics and multifunction capabilities. Di erent from other
counters, it employs many new detection methods which other counters don't
have. Being improved in many aspects of internal structure which make it quite
di erent from other bill counters, this hi-tech compact counting machine is easy
to operate and repair. It is sturdy and utterly reliable and suitable for all kinds of
banking industry and store department.
We recommend the user to verify the gift box contains all of the items listed here:
1. Machine body
2. Operation manual
3. Power wire
4. Fuse
5. Brush
6. External display
3. Safety Instructions
Read and understand all of the instructions and warnings both on the machine
and manual.
•
Follow all warnings and instructions marked on the unit.
•
This product should be operated only from the type of the power source indicated
in the user's guide. If you are not sure of the type of power supply in your location,
consult your dealer or local power company.
•
Only use the cable provided with the unit. The use of other cable may result in
electric shock, re or cause serious damage to the unit.
•
Never push objects of any kind into the unit through case slots, since they may
touch dangerous voltage points or shortcut parts, resulting in a risk of re or
electric shock.
•
Unplug this product from the wall outlet and refer servicing to quali ed service
personnel under the following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If the liquid has been spilled into the unit.
c. If the unit has been exposed to rain or water.
4
www.PyleUSA.com
d. If the machine has been dropped or the case has been damaged.
e. If the product shows a noticeable change in performance.
•
To reduce the risk of electric shock, do not disassemble this product.
Take it to quali ed service personnel when service or repair work is required.
Opening or removing covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock when the appliance is subsequently
used.
•
Do not use the unit if the power cord is damaged or if the plug socket contact is
loose. Don't follow these instructions may occur in electric shock , re or other
hazards.
•
When unplugging the power plug, do not pull it by the cord but rather grip the
plug and pull it out, don't follow those instruction may occur electric shock, re or
damage to the unit.
4. Power Up
Connect the power cord to the machine (power outlet), then plug it to power
source and turn the switch on; the unit will conduct a self-check by spanning the
feeding roller while the MG and/or UV/IR functions will be automatically turned on
by default. The counting display will show "0" when the unit is ready <the machine
is in its normal working condition>.
5. Counting Function
1. Counting Function
•
Once the bills are correctly placed in the hopper, the machine
will start counting automatically (except in the manual
counting mode). The number of counted bills will be shown
on the counting display. Moreover, once the bills are removed
from the stacker, the counting display will be clear and the
batch display in turn will show the number of counted bills
instead.
•
Bills should be correctly placed as indicated in the following
steps:
Place the bills between the counting guides as shown in the
gure 1, then push the bills backward to make them lay on
the top of the hopper plate, in the correct counting position
as shown in the gure 2.
Figure 1
Put the bills
by this direction
Figure 2
Push the bills
backward
5
www.PyleUSA.com
Advertisement
