Advertisement
All manuals and user guides at all-guides.com
CHARACTER SEARCH (OPTIONAL)
• Press "AMS" button 3 times and "Char srch" will be shown on the display.
• Press "SEL" to enter into character search mode and "A" will appear on the display for you to enter first character.
• Enter whole name of files (maximum 8 characters) by Rotating volume control button clockwise or anti-clockwise to
shift "A-Z", "0-9" & " " (space) in loop rotation.
• Press "SEL" shortly to select the first character.
• Repeat the same procedure to enter the other characters if required.
• After the whole name of file is entered, press "SEL" button more than 2 seconds to start playing the selected track.
Remark :
1) The media must contain directories or files name written by the CD writer in order to use in searching.
2) If only partial letters are entered for searching either in directories or files name, you may not get it correctly.
WIRE CONNECTION
CAUTION :
Do not connect the speaker wires to chassis or car body. Each speaker wire cannot be soldered together with
other wires. Otherwise, the unit will be damaged and no sound will come out anymore.
RESET FUNCTION
The RESET button is located on the front
of main panel. It is recessed in order to
prevent accidental engagement, and can
be activated with the tip of a ball-point pen
or any similar pointed object.
circuitry is provided in order to protect the
unit's microprocessor, and should only be
activated under the following conditions :
a) Initial installation after all wiring is
completed.
b) Abnormal operation is encountered such
as numerical indication on display is
erratic.
c) Whenever the reset button is activated,
all preset memory content will be erased
and must be reprogrammed.
Page. 5
This reset
P / N : 570-F78902-01
Advertisement
