Security-Center PROFILINE TV8141 Manual page 32

OSD FUNCTIONAL INSTRUCTION OF OPERATION
1. Press OSD key, then the following 10 functions will appear: 1.COLOR; 2.TINT; 3.BRIGHTNESS;
4.CONTRAST; 5.SHARPNESS; 6.VOLUME; 7.DWELL TIME*; 8.LANGUAGE; 9.TITLE**; 10.VERSION
(Only software version display).
2. Press the (up) or (down) to select the desired function.
3. When the function is selected, press the ENTER key, then the control bar will appear on the screen.
4. Press the (up) or (down) to adjust the selection needed. When finished press ENTER to exit.
5. Press the OSD key to close the function screen.
DWELL TIME When the item is selected, press ENTER to set the auto change time (time range from 1 sec to 31 sec). When
finished press ENTER to exit. Press the OSD key to close the menu, then press SEQ key, which will automatically change the
display channel according to the range of time.
To set up the parameter for each subcategory under TITLE from OSD, select "TITLE"on the screen, then enter EDIT "TITLE"
then detailed operating steps will appear:
(1) Move the cursor upward ( ) or downward ( ) to edit user's requirement "CH" (CH A CH B CH Y/C)
(2) Press ENTER to enter "EDIT".
(3) Select the "character" with upward ( ) or downward ( ), then press ENTER.
(4) After select "character", press ENTER.
(5) After edited, then press OSD to exit "EDIT".
(6) If you want to edit other "CH", repeat (2) ~ (4) steps.
(7) If you want to switch TITLE "ON"or "OFF", please select and press ENTER.
(8) If you want to leave the screen, you can select "EXIT" with upward ( ) or downward ( ), then press ENTER to exit.
(9) When finished, press OSD key to close the menu.
*DWELL TIME can be applied to TV8141 and TV8154 only.
**TITLE can be applied to TV8141, TV8153 and TV8154 only.
32