HB Products HBLC-CO2 Quick Manual

Level transmitter for co2 refrigerant
Hide thumbs Also See for HBLC-CO2:

Advertisement

Quick Links

HB Products – dedicated to optimal solutions for level measurement
and control of oil and refrigerants.
HB Products is a development-oriented company, which specializes in the development and
production of sensors for industrial refrigeration systems. Apart from expertise within oil and
refrigerant control, we have great know-how in the design and optimization of industrial
refrigeration systems. This knowledge enables us to develop and produce the best sensors!
Since its start more than 20 years ago, HB Products has attained a strong global position. This
is the result of our ability to think in terms of new technological solutions, create trustworthy
products, and provide a high level of service.
For further info and
guidance please visit
our homepage:
HB Products A/S –
www.hbproducts.dk
support@hbproducts.dk
– tel.: +4587476200
Quick guide
HBLC-CO2 - level transmitter for CO2 refrigerant

Functionality:

The HBLC-CO2 level transmitter is made to control refrigerant level in refrigeration systems. If the
HBLC-CO2 is to be used in a different way, prior approval must be obtained from HB Products.

Download complete manual:

For further information please download the instruction manual from our homepage:
www.hbproducts.dk.
Caution:
Only qualified personnel should work with the product. The technician must be aware of the
consequences of an improperly installed sensor, and must be committed to adhering to the
applicable local legislation.
Quick guide – HBLC-CO2 – rev. 004

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HBLC-CO2 and is the answer not in the manual?

Questions and answers

Summary of Contents for HB Products HBLC-CO2

  • Page 1 The HBLC-CO2 level transmitter is made to control refrigerant level in refrigeration systems. If the HBLC-CO2 is to be used in a different way, prior approval must be obtained from HB Products. Download complete manual: For further information please download the instruction manual from our homepage: www.hbproducts.dk.
  • Page 2 It must be mounted vertically. "R" for factory reset. Alarm is reset by pressing "R" for 5 seconds. HBLC-CO2 can be mounted on an overflow pipe or a pipe segment where flow and turbulence are minimized. CAUTION! In case of welding work on the unit, please make sure that...

Table of Contents