Related Manuals for Pier 1 Imports 57575 00
Summary of Contents for Pier 1 Imports 57575 00
- Page 1 Caution : You must read this before you proceed Reclining Chair Label Picture Description Chair Backrest Chair Base With Footrest Page -4105 OF 7...
- Page 2 Before Beginning Assembly: Parts Introduction Chair Backrest(A) Chair Base with Footrest(B) FRONT FACING This Reclining Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Reclining Chair parts, the above picture is to help you put the various parts into perspective.
- Page 3 Step 1 Velcro Remove the Chair Backrest(A) from the Base with Footrest(B) Step 2 Velcro Velcro With assistance from your adult partner, hold up the Chair Backrest(A), while standing behind the Chair. Insert the small metal arms on the sides of the Chair Backrest(A) into the prefabricated slide lock gadget on the Chair Base with Footrest(B) as shown above.
- Page 4 Step 3 Velcro Smooth down the fabric flap on the Chair Backrest(A). Run your hands down both sides of the flap, from top to bottom, allowing the velcro tape to adhere to the flap under the seat of the chair. Step 4 Make sure all parts are connected and securely locked into position.
- Page 5 Disassembly Note:Open the flap on the Chair Backrest(A),use a screwdriver(Don't use fingers) pressing outward on the metal ear on the preattached Metal Bracket on one side of the Chair Base(B),with assistance of you adult partner to keep the Chair Base(B) in place, pull out the Chair Backrest(A) upward at the same time,repeat the same step for another side.Then the Chair Backrest(A) can be taken out.
- Page 6 Sit into the seat. Open the trigger on the outside of right armrest. Use your body weight and push backwards into the seat into a fully reclined position. To get out of chair - move Seatback into Upright Position Tilt your body weight slightly forward and upwards. The seat back will come up to an upright position.
- Page 7 Page -4099 OF 7...