Garmin MONTANA 600 Series Instructions Manual page 3

4. Tighten the nuts
the rough-edged end on the outside,
until the mount is secure. Do not
overtighten.
installing Your Montana in the
Mount
NOTE: If reflected light or glare
makes the device display difficult
to see, apply an anti-glare screen
protector to the screen.
by hand with
➎
1. Fit the bottom of your device into
the cradle .
➊
2. Tilt the device back until it snaps
into place.
3. Use the security screw tool
tighten the security screw
the top of the mount to secure the
device and deter theft.
➋
➊
➋
on
➌
➌
to
3