Table of Contents
Advertisement
• Do not splash or irrigate the main body of the lower part of the washing
machine which can cause the electrical failure of the whole machine to work.
• Please do not inject water higher than 60 degrees directly into the laundry in
the washing machine, so as to prevent the product from deforming due to
high temperature and causing it to be bad.
• When using, please be sure to wash and complete the current program and
then power o .
• Do not power o the program without running the program directly, which
will cause damage to the performance of electrical accessories;
Abnormality or Malfunction: Please stop using it immediately, pull out the
power plug, and turn o the power. Unless otherwise speci ed in this manual,
do not repair or replace any parts of the washing machine. If the power cord is
damaged, in order to avoid danger, it must be replaced by a professional from
the manufacturer.
Installation Steps
• The folding washing machines must be connected properly, or it will not
work well.
• Water intake and drainage condition and electrical connections must conform
to the following or the standards speci ed in the manual.
Receiving Inspection
Please remove the packing cases, bags and other packing materials of this
machine. Count all items according to the packing list. Each washing machine is
tested before it goes out, so there will be a small amount of water or water marks
left inside the machine.
Select Installation Position
The position should be away from heat source and avoid direct sunlight to
prevent shell coating from peeling or fading. Please unroll the washing machine
rst, and then place it on a stable level.
Drainage
1. Lower drainage: Pull out the plug of outlet on the pedestal, the machine begins
to drain o water naturally, and then insert the plug into the outlet after the
water drains.
www.PyleUSA.com
3
Advertisement
Table of Contents
