Advertisement
5.6.
SETTING POWER
5.6.1.
Heater has 3 power settings selected by pressing.
POWER SETTING 1 TOP ELEMENT ON
5.6.2.
Screen displays:
5.6.3.
POWER SETTING 2 BOTTOM ELEMENT ON
Screen displays:
5.6.4.
POWER SETTING 3 BOTH ELEMENTS ON
Screen displays:
5.7.
SETTING CURRENT DATE AND TIME
5.7.1.
After power on press
5.7.1.
When DAY symbol (Mon to Sun) flashes, press
5.7.2.
Press
again to select HOUR by pressing
5.7.3.
Press
again to select MINUTES by pressing
5.7.4.
Press
to save the date and time or wait 5 seconds without pressing the buttons and selected day and time will be saved .
5.7.5.
Repeat above procedure to reset day and time.
5.8.
SETTING DAYS OF WEEK WORKING TIME MODES
5.8.1.
Power on. Press
5.8.2.
When MON flashes select days of the week by pressing
5.8.3.
Heater has 7 daily programs and 3 working time modes can be set up within each day.
5.8.4.
Press
again and select working time modes 01, 02 03 by pressing
5.8.5.
Press
again to set the timer for power on (hours first, then minutes) by pressing
5.8.6.
Press
again to set the timer for power off. Operation is the same as above (selected using
5.8.7.
Then press
again to set temperature. Default temperature setting is 30°C.
5.8.8.
Press
again to finish the timer setting for that day. Repeat the above procedure for other days.
5.8.9.
Press
to activate or deactivate the days of week working time modes. When week and time symbols are both displayed it means
the days of week working time mode is active.
5.8.10.
Repeat above procedures to change weekly working time modes timer.
© Jack Sealey Limited
for 3 seconds to set current date and time.
once to set days of the week timer.
Original Language Version
to select day.
)
CH30 Issue:1 28/07/21
Advertisement
