Horizontal Position
Hang bracket on white aluminum mounting strip located on
side of RV.
Open 2 folding arms on bracket, make sure they lock in
position.
Slide grill onto 2 arms, make sure grill is fully on arms,
against stops.
Insert retaining pins into arms
To remove grill, simply slide Side-Kick off of bracket arms.
Note that boat models will be above the bracket top instead
of below as shown.
Figure 'A'
Horizontal Position
(See Figure A)
Tabletop Position
Open 2 folding arms on bracket, make sure they lock in
position.
Place bracket on clean flat surface with arms pointing
upward.
Slide grill upright onto 2 arms, make sure grill is fully on
arms, against stops.
To remove grill, simply slide Side-Kick off of bracket arms.
Figure 'B'
Tabletop Position
(See Figure B)