Honda NSC110 2020 Manual page 106

20201028145327_32K2CA000_eng_BOOK Page 106 Wednesday, October 28 2020 15:00:25 JST
Example:
To input "0", wait for 5 seconds without
●
pushing the ignition switch when the
Honda SMART Key indicator comes on.
To input "1", push the ignition switch once
●
within 5 seconds when the Honda SMART
Key indicator comes on.
To input "0"
To input "1"
Unlock the Ignition Switch in an Emergency
ID number input success
After the last ID number is inputted, the
Honda SMART Key indicator will go off and
come on again.
The ignition switch is then unlocked. Turn the
ignition switch to the (On) position within
6 minutes. You can start the engine.
To lock the ignition switch, turn the ignition
Ignition switch
switch to the SEAT,
position, and push and hold the ignition
switch for about 2 seconds. All turn signals
flash once.
The ignition switch also locks automatically
No push
when the ignition switch has been in the
SEAT,
Ignition switch
6 minutes after the ID number is successfully
inputted.
When the ignition switch is locked, the
Honda SMART Key indicator goes off.
To unlock the ignition switch again, repeat the
Push one time
procedure for unlocking the ignition switch.
(Off), or (Lock)
(Off), or (Lock) position for about
Continued
103