Unlock The Ignition Switch In An Emergency - Honda NSC110 2020 Manual

20201028145327_32K2CA000_eng_BOOK Page 105 Wednesday, October 28 2020 15:00:25 JST

Unlock the Ignition Switch in an Emergency

ED, E type
# Set up to ID number input mode
Check the ID number on the ID tag.
1.
Push and hold the ignition switch for
2.
more than 4 seconds. The Honda SMART
Key indicator starts blinking.
Push the ignition switch while the Honda
3.
SMART Key indicator is blinking, then the
Honda SMART Key indicator changes
from blinking to lighting.
This means that you can input the ID
u
number.
102
# ID number input
You can input your ID number by pressing
the ignition switch when the ignition switch is
in the
Input the ID number on the ID tag in order
from the left in turn by pressing the ignition
switch.
The ID number is authenticated according to
the number of times the ignition switch is
pushed.
Push the ignition switch the desired number
of times within 5 seconds when the Honda
SMART Key indicator comes on. After 5
seconds, the Honda SMART Key indicator
goes off and comes on again. This means
that the inputted number is fixed, and you
ID number
can input the next number.
(Off), (Lock) or SEAT position.