Important Service Notes (For U.k. Only); Specifications - Sharp CD-BA1200H Service Manual

IMPORTANT SERVICE NOTES (FOR U.K. ONLY)

Before returning the unit to the customer after completion of a
repair or adjustment it is necessary for the following withstand
voltage test to be applied to ensure the unit is safe for the
customer to use.
Setting of Withstanding Voltage Tester and set.
Set name
Withstanding Voltage Tester
Test voltage
Set time
Set current (Cutoff current)
Unit
Judgment
OK: The "GOOD" lamp lights.
NG: The "NG" lamp lights and the buzzer sounds.
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
CD-BA1200H
General
Power source: AC 230 V, 50 Hz
Power consumption: 32 W
Dimensions: Width; 270 mm (10-5/8")
Height; 300 mm (11-13/16")
Depth; 373 mm (14-11/16")
Weight: 5.0 kg (11.0 lbs.)
Amplifier section
Output power: RMS; 20 W (10 W + 10 W)
(For U.K.)
RMS; 14.6 W (7.3 W + 7.3 W)
Output power: PMPO; 64 W
(Except For U.K.)
MPO; 32 W (16 W + 16 W)
RMS; 20 W (10 W + 10 W)
RMS; 14.6 W (7.3 W + 7.3 W)
Output terminals: Speakers; 8 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
Compact disc player section
Type: 3-disc multi-play compact
disc player
Signal readout: Non-contact, 3-beam semi-
conductor laser pickup
D/A converter: 1-bit D/A converter
Frequency
response: 20 - 20,000 Hz
Dynamic range: 90 dB (1 kHz)
Tuner section
Frequency range: FM; 87.5-108 MHz
AM; 522-1,620 kHz
All manuals and user guides at all-guides.com
set value
4,240 VPEAK
3,000 VRMS
6 secs
4 mA

SPECIFICATIONS

(10 % T.H.D.)
(0.9 % T.H.D.)
(DIN 45 324)
(DIN 45 324)
(DIN 45 500)
WITHSTANDING
VOLTAGE TESTER
AC
Cassette deck section
Frequency response:
Signal/noise ratio:
Wow and flutter:
(For U.K.)
Wow and flutter:
(Except For U.K.)
CP-BA1200H
Type:
Maximum input power: 20 W
Rated input power:
Impedance:
Dimensions:
Weight:
Specifications for this model are subject to change without
prior notice.
– 3 –
CD-BA1200H
PROBE
+
OUT
-
UNIT
CONNECT THE PROBE
SHORT-CIRCUIT
TO GND OF CHASSIS
AC POWER
SCREW
SUPPLY CORD
CHASSIS SCREW
50-14,000 Hz (Normal tape)
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
0.3 % (WRMS)
0.35 % (DIN 45 511)
10 cm (4") full-range speaker
10 W
8 ohms
Width; 220 mm (8-11/16")
Height; 300 mm (11-13/16")
Depth; 180 mm (7-1/16")
2.0 kg (4.4 lbs.)/each