Table of Contents
Advertisement
8. Connect the speaker's audio cable and audio jack of monitor to transfer audio source
9. Insert the power cord into the monitor, then plug the monitor power cord and the
10. Assembled cables with Line Cleaner as shown below.
1-9 Flat Panel Monitor User's Guide
from Display Port, HDMI, Type-C or USB.
Note: The audio output in Display Port, HDMI or Type-C modes.
computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certified power
supply cord not lighter than ordinary polyvinyl chloride flexible cord according to
IEC 60227 (designation H05VV-F 3G 0.75mm
be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245
(designation H05RR-F 3G 0.75mm2 ) shall be used.
2
or H05VVH2-F2 3G 0.75mm
2
) shall
Hide quick links:
Advertisement
Table of Contents
