1. Manuals
  2. Brands
  3. DREMCOR Manuals
  4. Tent
  5. Select Series
  6. Instructions and owner's manual

DREMCOR Select Series Instructions And Owner's Manual

Frame tent single piece top
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
20' x 30' Select Series frame tent single piece
top instruction and owner's manual
Important: Read this manual before installation or use of this
product. Failure to do so can result in serious personal injury or
damage to the product. RETAIN THIS MANUAL!!
Notice to all installers and users
The following instruction manual is provided as a guide to installers and
users. The situations and conditions described in this manual cannot
represent all situations that may be encountered during the installation or
dismantling process. The use of common sense, good judgment, and safe
practices must be followed to prevent injury and damage to the product.
Equipment/manpower for installation
*Ground cloth, sledge hammer or breaker hammer fitted with stake driver bit and
stake puller.
*A minimum of (3) adults are required for installation.
*Sit down dinner (round tables) = 60
*Cathedral (row) seating = 96
*Stand up / cocktail = 120
Tent occupancy guidelines

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Select Series and is the answer not in the manual?

Questions and answers

Related Manuals for DREMCOR Select Series

Summary of Contents for DREMCOR Select Series

  • Page 1 20’ x 30’ Select Series frame tent single piece top instruction and owner’s manual Important: Read this manual before installation or use of this product. Failure to do so can result in serious personal injury or damage to the product. RETAIN THIS MANUAL!!

  • Page 2: Contents Of This Manual

    Contents of this manual Personal safety Product specification sheet Hardware (what’s included) Frame and stake layout Weather conditions Installation site 20’ wide frame tent anchoring and staking guide Installation procedure Tent dismantling procedure Maintenance and Care Warranty Information Personal safety Personal safety must be practiced during the installation process to avoid injury to yourself and others.
  • Page 3 20’ x 30’ Select Series frame tent specification sheet Feature Specification Note Style / Series Traditional / Select Series West Coast style Width 20 ft / 6.1 m Length 30 ft / 9.15 m Total height 12 ft / 3.65 m...
  • Page 4 20’ x 30’ Select Series frame tent hardware (what’s included) Symbol Item Length/color Quantity Diagram/description Legs 6’8” (brown) or Anodized aluminum poles with predrilled holes 7’8” long (black) Spreader 9’4” / white Anodized aluminum poles with predrilled holes Rafter 10’6” / green...

  • Page 5: End View

    20’ x 30’ frame and stake layout Rafter (total Overhead 6 / green) Spreader view (total 11 / white) Hip rafter The diagrams (total 4 / red) represent the component layout locations 8’ webbing with 2” ratchet & webbing loop (connects with loop (connects to tent frame) to stake)

  • Page 6: Weather Conditions

    *Contact all related underground utility “call before you dig” authorities prior to staking. *Note: Dremcor LLC assumes no responsibility for the method of installation that the installer chooses or the failure to contact the proper authorities as noted above. Each state, county, township or city may have unique temporary structure installation codes and requirements so it is important that the proper codes &...
  • Page 7 Option #1: Noose loop around stake Option #2: Stake inserted to double D ring 8’ long loop strap is “noose” Dremcor has both strap options available for purchase. wrapped around the frame Double D ring option eliminates noose forming and...

  • Page 8: Installation Procedure

    Installation procedure Frame part layout *Layout the frame fittings and pipe in the location the tent will be installed. Use the frame layout overhead view diagram described earlier in this manual. *Place the 6 way crowns in the center as noted in the diagram. Excluding the single long extension, the 6 way crown has 2 extensions that will not contact the ground (if placed on a flat surface).
  • Page 9 Installation procedure (continued) *Roll out the ground cloth on the side of the assembled frame tent roof. The alligator clips must be facing downward. DO NOT WALK ON THE TENT TOP. The ground cloth must be larger than the tent top roof for protection (see diagram below) Installing tent top to frame *Pull the tent top over the...
  • Page 10 Installation procedure (continued) Lifting the frame *In windy conditions, locate the direction of the wind. THIS PROCESS IS IMPORTANT TO PREVENT DAMAGE TO THE PRODUCT AND PERSONAL INJURY (see diagram below). Leg & base Wind plate direction Ground Installing corner and side legs *Step on the base plate and lift one side of the frame.
  • Page 11 Installation procedure (continued) Anchoring/staking *Place the stakes 5’ from the outside perimeter of the tent (see the anchoring and staking section of this manual for stake positions) *Drive the stakes into the ground vertically so no more than 6” is remaining above the surface (see anchoring and staking page of this manual).

  • Page 12: Maintenance And Care

    *Damage caused by use of harsh chemicals, fireworks, flames, sharp objects In the event of a defect in material or workmanship, Dremcor LLC will replace or repair the product. Photos and an explanation of the defect may be requested of the purchaser.

Table of Contents