Download Print this page

Advertisement

Quick Links

JASPER LOW SLEEPER BED
ASSEMBLY INSTRUCTIONS
RIGHT OPTION 1
RIGHT OPTION 1
PLEASE READ BEFORE YOU CONTINUE FURTHER
CARE AND MAINTENANCE
After unpacking this product please keep the original packaging in case it needs to be returned for any reason.
Please ensure all fi ttings and parts are present before commencing with assembly.
Never drag or push products as this could cause damage to the joints making it inferior.
We strongly recommend that you keep children away from your work area.
Assemble this product as close to its fi nal position as possible.
Do not place this product next to a radiator or in direct sunlight.
Do not drag or push items across your high gloss furniture as this may cause the surface to scratch.
Wood is a natural product and may expand if subjected to damp and may shrink or crack if subjected to heat.
Therefore it is recommended that room temperature is maintained, with no sudden temperature fl uctuations.
Make sure any spillage is wiped off immediately.
Do not place hot or chilled items directly on to the surface, use a place mat or marking will occur.
For general cleaning use a soft cotton or micro fi bre cloth, and do not use detergents of any kind.
From time to time it may be necessary to tighten fi ttings, regular inspections should be carried out.
Do not place on a wet or damp fl oor as staining may occur to your fl oor.
BLUE GLOSS
IMPORTANT
FOR DOMESTIC USE ONLY
SEC/AY/12/19/HN1
2329HN
2329HN
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Jasper low sleeper bed blue gloss and is the answer not in the manual?

Questions and answers

Summary of Contents for Seconique Furniture Jasper low sleeper bed blue gloss

  • Page 1 SEC/AY/12/19/HN1 JASPER LOW SLEEPER BED 2329HN 2329HN BLUE GLOSS ASSEMBLY INSTRUCTIONS RIGHT OPTION 1 RIGHT OPTION 1 IMPORTANT FOR DOMESTIC USE ONLY PLEASE READ BEFORE YOU CONTINUE FURTHER CARE AND MAINTENANCE After unpacking this product please keep the original packaging in case it needs to be returned for any reason. •...
  • Page 2 SEC/AY/12/19/HN1 ITM/D523-...
  • Page 3: Parts List

    SEC/AY/12/19/HN1 ITM/D523- *Use of power tools to assemble this product will invalidate *Please check contents and read the instructions before commencing assembly. any claim and damage this product making it unsafe!!! *Assemble this product following the enclosed instructions carefully. *Please assemble on a clean soft suface to avoid damage. *Please take care to avoid damaging panels during assembly.
  • Page 4 SEC/AY/12/19/HN1 ITM/D523- FITTINGS LIST Flat Head Screw Flat Head Screw Flat Head Screw O 3,5x40mm O 3,5x10mm O 4,5x60mm Nail 10x10mm Flat Head Screw Flat Head Screw O 3,0x30mm O 3,0x16mm Dowel O 5x25mm Nail 1/8x23mm Cam Nut O 12mm Dowel O 8x60mm Cam Bolt Cylindrical Nut...
  • Page 5: Pre-Assembly

    SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Flat Head Screw O 3,5x10mm Dowel O 5x25mm Metal Support Plastic Foot 12x15mm Glue Nail 10x10mm Detail 1 Detail 2 Detail 2 Detail 2 Detail 1 Detail 1 Detail 2 Detail 3 PRE-DRILLED HOLE...
  • Page 6 SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Flat Head Screw O 3,5x10mm Dowel O 5x25mm Metal Support Glue Detail 3 Detail 3 Detail 1 Detail 1 Detail 1 Detail 3 PRE-DRILLED HOLE...
  • Page 7 SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Flat Head Screw O 3,5x10mm Dowel O 5x25mm Metal Support Plastic Foot 12x15mm Glue Nail 10x10mm Detail 1 Detail 2 Detail 1 Detail 2 Detail 1 Detail 3 PRE-DRILLED HOLE...
  • Page 8 SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Dowel O 5x25mm Cylindrical Nut Glue Detail 4 Detail 1 Detail 4 Detail 4 Detail 4 Detail 1 Detail 4 Detail 1 Detail 4 Detail 4 Detail 1 Detail 4 Detail 4 Detail 1...
  • Page 9 SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Glue Dowel O 5x25mm Drawer Runners Union screw 15mm Detail 1 Detail 1 Detail 18 Detail 1 Detail 1 SECOND HOLE (LINE UP WITH PRE-DRILLED HOLE) LAST SECOND HOLE Detail 1 Detail 18...
  • Page 10 SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Flat Head Screw O 3,5x10mm Glue Dowel O 5x25mm Drawer Runners Detail 1 Detail 1 Detail 5 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 SECOND HOLE FIRST HOLE (LINE UP WITH PRE-DRILLED HOLE) LAST THIRD HOLE Detail 1 Detail 5...
  • Page 11 SEC/AY/12/19/HN1 Pre-Assembly ITM/D523- Flat Head Screw O 3,5x10mm Nail 1/8x23mm Plastic Foot 25x30mm Drawer Runners Detail 6 Detail 5 Detail 6 Detail 5 Detail 6 Detail 6 Detail 5 SECOND HOLE FIRST HOLE (LINE UP WITH PRE-DRILLED HOLE) LAST THIRD HOLE Detail 5 Detail 6 PRE-DRILLED HOLE...
  • Page 12 SEC/AY/12/19/HN1 Pre-Assembly ITM/D523- Plastic Foot 12x15mm Dowel O 5x25mm Dowel O 8x60mm Cylindrical nut Glue Nail 10x10mm Detail 1 Detail 2 Detail 4 Detail 1 Detail 2 Detail 4 Detail 1 Detail 4 Detail 1 Detail 10 Detail 10 Detail 4 Detail 4 Detail 10 Detail 10...
  • Page 13 SEC/AY/12/19/HN1 Pre-Assembly ITM/D523- Flat Head Screw O 3,0x16mm Nail 1/8x23mm Plastic Foot Ladder Bracket Cylindrical Nut Detail 4 Detail 7 Detail 4 Detail 8 Detail 4 Detail 4 Detail 4 Please knock hardware (L) fully into the ladder steps (part 17 and 18) Detail 4 Detail 8 Detail 7...
  • Page 14 SEC/AY/12/19/HN1 Pre-Assembly ITM/D523- Dowel O 5x25mm Glue Cam Bolt Detail 9 Detail 9 Detail 1 Detail 9 Detail 1 Detail 9 Detail 9 Detail 1...
  • Page 15 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw Flat Head Screw O 3,5x40mm O 3,5x10mm Metal Support Glue Hole Plugs Detail 15 Detail 1 Detail 15 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 12 Detail 15 Detail 3 Detail 1 PRE-DRILLED HOLE...
  • Page 16 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw Flat Head Screw O 3,5x10mm Glue O 3,5x40mm Detail 3 Detail 3 Detail 3 Detail 3 Detail 1 Detail 1 Detail 1 Detail 12 Detail 1 Detail 12 Detail 3 Detail 12 Detail 1...
  • Page 17 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 3,5x10mm Glue Detail 11 Detail 11 Detail 11 Detail 11 Detail 1 Detail 13 Detail 1 Detail 1 Detail 13 Detail 1 Detail 13 Detail 1 Detail 13 Detail 13 Detail 1 Detail 13 Detail 13 Detail 11 Detail 1...
  • Page 18 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 4,5x60mm Glue Hole Plugs Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 1 Detail 15...
  • Page 19 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 4,5x60mm Glue Hole Plugs Detail 15 Detail 15 Detail 1 Detail 15...
  • Page 20 ITM/D523- Flat Head Screw O 4,5x60mm Glue Hole Plugs Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 1 Detail 15...
  • Page 21 SEC/AY/12/19/HN1 ITM/D523- Nail 10x10mm For your future reference order number should be here Detail 14 Detail 14...
  • Page 22 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 3,0x30mm Spacer Please fi x the fi rst slats adjacent to the headboard and footboard and work towards the middle of the bed using the spacer (U) as shown to ensure correct spacing. Fix all the slats to one siderail fi...
  • Page 23 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 4,5x60mm Hole Plugs Detail 15 Detail 15 Detail 15 Detail 15 Detail 15...
  • Page 24 SEC/AY/12/19/HN1 ITM/D523- Cam Nut O 12mm Glue 1° 2° Detail 1 Detail 10...
  • Page 25 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 3,0x16mm Drawer Runners Nail 10x10mm 3° Detail 20 4° Detail 21 THIRD HOLE THIRD HOLE...
  • Page 26 SEC/AY/12/19/HN1 ITM/D523- 5° Detail 22 Hole Plugs Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22...
  • Page 27: Care And Maintenance

    SEC/AY/12/19/HN1 JASPER LOW SLEEPER BED 2329HN 2329HN BLUE GLOSS ASSEMBLY INSTRUCTIONS LEFT OPTION 2 LEFT OPTION 2 IMPORTANT FOR DOMESTIC USE ONLY PLEASE READ BEFORE YOU CONTINUE FURTHER CARE AND MAINTENANCE After unpacking this product please keep the original packaging in case it needs to be returned for any reason. •...
  • Page 28 SEC/AY/12/19/HN1 ITM/D523-...
  • Page 29 SEC/AY/12/19/HN1 ITM/D523- *Use of power tools to assemble this product will invalidate *Please check contents and read the instructions before commencing assembly. any claim and damage this product making it unsafe!!! *Assemble this product following the enclosed instructions carefully. *Please assemble on a clean soft suface to avoid damage. *Please take care to avoid damaging panels during assembly.
  • Page 30 SEC/AY/12/19/HN1 ITM/D523- FITTINGS LIST Flat Head Screw Flat Head Screw Flat Head Screw O 3,5x40mm O 3,5x10mm O 4,5x60mm Nail 10x10mm Flat Head Screw Flat Head Screw O 3,0x30mm O 3,0x16mm Dowel O 5x25mm Nail 1/8x23mm Cam Nut O 12mm Dowel O 8x60mm Cam Bolt Cylindrical Nut...
  • Page 31: Pre-Assembly

    SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Flat Head Screw O 3,5x10mm Dowel O 5x25mm Metal Support Plastic Foot 12x15mm Glue Nail 10x10mm Detail 1 Detail 2 Detail 2 Detail 2 Detail 1 Detail 1 Detail 2 Detail 3 PRE-DRILLED HOLE...
  • Page 32 SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Flat Head Screw O 3,5x10mm Dowel O 5x25mm Metal Support Glue Detail 3 Detail 3 Detail 1 Detail 1 Detail 1 Detail 3 PRE-DRILLED HOLE...
  • Page 33 SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Flat Head Screw O 3,5x10mm Dowel O 5x25mm Metal Support Plastic Foot 12x15mm Glue Nail 10x10mm Detail 1 Detail 2 Detail 1 Detail 2 Detail 1 Detail 3 PRE-DRILLED HOLE...
  • Page 34 SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Dowel O 5x25mm Cylindrical Nut Glue Detail 4 Detail 1 Detail 4 Detail 4 Detail 4 Detail 1 Detail 4 Detail 1 Detail 4 Detail 4 Detail 1 Detail 4 Detail 4 Detail 1...
  • Page 35 SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Glue Dowel O 5x25mm Drawer Runners Union screw 15mm Detail 1 Detail 1 Detail 18 Detail 1 Detail 1 SECOND HOLE (LINE UP WITH PRE-DRILLED HOLE) LAST SECOND HOLE Detail 1 Detail 18...
  • Page 36 SEC/AY/12/19/HN1 ITM/D523- Pre-Assembly Flat Head Screw O 3,5x10mm Glue Dowel O 5x25mm Drawer Runners Detail 1 Detail 1 Detail 5 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 SECOND HOLE FIRST HOLE (LINE UP WITH PRE-DRILLED HOLE) LAST THIRD HOLE Detail 1 Detail 5...
  • Page 37 SEC/AY/12/19/HN1 Pre-Assembly ITM/D523- Flat Head Screw O 3,5x10mm Nail 1/8x23mm Plastic Foot 25x30mm Drawer Runners Detail 6 Detail 5 Detail 6 Detail 5 Detail 6 Detail 6 Detail 5 SECOND HOLE FIRST HOLE (LINE UP WITH PRE-DRILLED HOLE) LAST THIRD HOLE Detail 5 Detail 6 PRE-DRILLED HOLE...
  • Page 38 SEC/AY/12/19/HN1 Pre-Assembly ITM/D523- Plastic Foot 12x15mm Dowel O 5x25mm Dowel O 8x60mm Cylindrical nut Glue Nail 10x10mm Detail 1 Detail 2 Detail 4 Detail 1 Detail 2 Detail 4 Detail 1 Detail 4 Detail 1 Detail 10 Detail 10 Detail 4 Detail 4 Detail 10 Detail 10...
  • Page 39 SEC/AY/12/19/HN1 Pre-Assembly ITM/D523- Flat Head Screw O 3,0x16mm Nail 1/8x23mm Plastic Foot Ladder Bracket Cylindrical Nut Detail 4 Detail 7 Detail 4 Detail 8 Detail 4 Detail 4 Detail 4 Please knock hardware (L) fully into the ladder steps (part 17 and 18) Detail 4 Detail 8 Detail 7...
  • Page 40 SEC/AY/12/19/HN1 Pre-Assembly ITM/D523- Dowel O 5x25mm Glue Cam Bolt Detail 9 Detail 9 Detail 1 Detail 9 Detail 1 Detail 9 Detail 9 Detail 1...
  • Page 41 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw Flat Head Screw O 3,5x40mm O 3,5x10mm Metal Support Glue Hole Plugs Detail 15 Detail 1 Detail 15 Detail 1 Detail 1 Detail 1 Detail 1 Detail 1 Detail 12 Detail 15 Detail 3 Detail 1 PRE-DRILLED HOLE...
  • Page 42 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw Flat Head Screw O 3,5x10mm Glue O 3,5x40mm Detail 3 Detail 3 Detail 3 Detail 3 Detail 1 Detail 1 Detail 1 Detail 12 Detail 1 Detail 12 Detail 3 Detail 12 Detail 1...
  • Page 43 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 3,5x10mm Glue Detail 11 Detail 11 Detail 11 Detail 11 Detail 1 Detail 13 Detail 1 Detail 1 Detail 13 Detail 1 Detail 13 Detail 1 Detail 13 Detail 13 Detail 1 Detail 13 Detail 13 Detail 11 Detail 1...
  • Page 44 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 4,5x60mm Glue Hole Plugs Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 1 Detail 15...
  • Page 45 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 4,5x60mm Glue Hole Plugs Detail 15 Detail 15 Detail 1 Detail 15...
  • Page 46 ITM/D523- Flat Head Screw O 4,5x60mm Glue Hole Plugs Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 15 Detail 1 Detail 15...
  • Page 47 SEC/AY/12/19/HN1 ITM/D523- Nail 10x10mm For your future reference order number should be here Detail 14 Detail 14...
  • Page 48 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 3,0x30mm Spacer Please fi x the fi rst slats adjacent to the headboard and footboard and work towards the middle of the bed using the spacer (U) as shown to ensure correct spacing. Fix all the slats to one siderail fi...
  • Page 49 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 4,5x60mm Hole Plugs Detail 15 Detail 15 Detail 15 Detail 15 Detail 15...
  • Page 50 SEC/AY/12/19/HN1 ITM/D523- Cam Nut O 12mm Glue 1° 2° Detail 1 Detail 10...
  • Page 51 SEC/AY/12/19/HN1 ITM/D523- Flat Head Screw O 3,0x16mm Drawer Runners Nail 10x10mm 3° Detail 20 4° Detail 21 THIRD HOLE THIRD HOLE...
  • Page 52 SEC/AY/12/19/HN1 ITM/D523- 5° Detail 22 Hole Plugs Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22 Detail 22...