Advertisement
MAIN PARTS DIAGRAM
D
A – right base support
B – left base support
C – Right swinging mechanism with control box
D – Left swinging mechanism
E – Seat unit/Bed
ASSEMBLY GUIDE
IMPORTANT! Follow exactly the guidelines and the sequence of steps for product assembly and use
which you will find in the figures in this manual.
CAUTION! After completing each step, check that fixing is secure!
CAUTION! Fixing in certain position is most of the times accompanied with a click!
CAUTION! Make sure all pins have shown through the openings.
Tools needed: screwdriver, used to insert and remove batteries. To complete assembly of swing you
do no need to use tools.
The assembly actions are numbered from 1 to 7. Use their descriptions below along with the illustration
with the same number.
1 – ASSEMBLY OF LEFT AND RIGHT SWINING MECHANISMS TO THE LEFT AND RIGHT
SUPPORTS
2 – SEAT ASSEMBLY
3 – ATTACHING THE SEAT TO THE FRAME
Insert both ends of the seat unit into the axis of swinging mechanisms until you hear a click sound.
To remove the seat unit press the buttons and pull inwards.
4 – TURNING OFF THE SWINGING FUNCTION
C
B
A
E
F
F – Canopy
G – Adapter
H – Instruction manual
I – Remote control
3
H
G
I
Advertisement
