Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Challenge Xtreme PGA750F
Summary of Contents for Challenge Xtreme PGA750F
- Page 1 750W aNgLe gRINdeR pga750f ORIgINaL INSTRUCTIONS...
-
Page 2: General Power Tool
OrIgINaL INstructIONs gENEraL POWEr tOOL location is unavoidable, use a residual current device (rcD) protected supply. Use saFEtY WarNINgs of an RCD reduces the risk of electric shock. WarNINg: read all safety warnings and all instructions. Failure to follow the 3) PErsONaL saFEtY warnings and instructions may result in electric a) stay alert, watch what you are doing and... - Page 3 OrIgINaL INstructIONs dangerous and must be repaired. b) Operations such as wire brushing is not c) Disconnect the plug from the power source recommended to be performed with this and/or the battery pack from the power tool power tool. Operations for which the power before making any adjustments, changing tool was not designed may create a hazard accessories, or storing power tools.
- Page 4 OrIgINaL INstructIONs may cause hearing loss. causes rapid stalling of the rotating accessory i) Keep bystanders a safe distance away which in turn causes the uncontrolled power from work area. anyone entering the tool to be forced in the direction opposite of the work area must wear personal protective accessory’s rotation at the point of the binding.
-
Page 5: Additional Safety
OrIgINaL INstructIONs a) use only wheel types that are motionless until the wheel comes to a recommended for your power tool and the complete stop. Never attempt to remove specific guard designed for the selected the cut-off wheel from the cut while the wheel. - Page 6 OrIgINaL INstructIONs sYMBOLs To reduce the risk of injury, user must read instruction manual Warning Double insulation Wear eye protection Wear ear protection Wear dust mask Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice HELPLINE NO 08448012949...
- Page 7 OrIgINaL INstructIONs HELPLINE NO 08448012949...
-
Page 8: Component List
OrIgINaL INstructIONs cOMPONENt LIst 1. Spindle locking button 2. On/off switch 3. Wheel guard for grinding 4. Disc 5. Auxiliary handle 6. Spanner 7. Outer flange 8. Inner flange 9. Clamp adjustment nut 10. Guard clamping lever 11. Wheel guard for cutting(not supplied)* Not all the accessories illustrated or described are included in standard delivery. -
Page 9: Noise Information
OrIgINaL INstructIONs tEcHNIcaL Data Type Pga750F(Pga-designation of machinery, representative of angle grinder) voltage 230-240v~50Hz Power 750W Rated speed 12000/min Disc size 115mm Protection class Machine Weight 1.8kg NOIsE INFOrMatION A weighted sound pressure :84dB(A) A weighted sound power :95dB(A) &K 3.0dB(A) -
Page 10: Intended Use
OrIgINaL INstructIONs Fig. A OPEratINg INstructIONs NOtE: This handle should be used at all times to maintain complete control of the tool. NOtE: Before using the tool, read the instruction book carefully. INtENDED usE The machine is intended for cutting, roughing and Fig. - Page 11 Fig. C1 Fig. C3 OrIgINaL INstructIONs Fig. C2 Fig. C2 Fig. D 7. tO usE tHE grINDEr (see Fig.E) attENtION: Do not switch the grinder on whilst the disc is in contact with the workpiece. allow the disc to reach full speed before starting to grind.
-
Page 12: Working Hints For Your Angle Grinder
OrIgINaL INstructIONs MaINtENaNcE Do not reduce the speed of running down cutting discs by applying sideward pressure. Remove the plug from the socket before carrying The direction in which the cutting is performed is out any adjustment, servicing or maintenance. important. -
Page 13: Plug Replacement
OrIgINaL INstructIONs PLug rEPLacEMENt (uK & IrELaND ONLY) If you need to replace the fitted plug then follow the instructions below. IMPOrtaNt The wires in the mains lead are colored in accordance with the following code: Blue = Neutral Brown= Live As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in... -
Page 14: Environmental Protection
OrIgINaL INstructIONs ENvIrONMENtaL PrOtEctION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. If faults can not be remedied, contact the Helpline on 08448012949 guaraNtEE This product is selected for DOMESTIC USE ONLY and not for business use.