Table of Contents
Advertisement
Assembly and electrical connections must be carried out by authorised personnel.
Electrical Connection
The Range Hood is fitted with a power cord and 3 pin plug. Install the Range Hood so that the
plug is easily accessible. Plug the 3- pin plug into a properly earthed, 10A general purpose power
outlet.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
The appliance has been manufactured as a class I, therefore earth cable is necessary.
The connection to the mains is carried out as follow:
IEC227
L = Live
Brown
N = Neutral
Blue
E = Earth
Green/Yellow
NOTE:
When controlling the rangehood to switch on and off with an electric cooktop, the power point
may be controlled by an isolation switch in conjunction with the cooktop power.
In this case, the power point for the rangehood must still be accessible by the customer after
installation.
It is the installer's responsibility to ensure and any relevant installation standards from the
Wiring Rules AS/NZS3000 are adhered to.
An omnipolar switch with a minimum aperture of 3mm between contacts, in line with the
electrical load and local standards, must be placed between the appliance and the network in
the case of direct connection to the electrical network.
North America
Black
White
Green
INSTALLATION
PG 9
Advertisement
Table of Contents
