Regulatory And Certification Information; Federal Communications Commission (Fcc) For Us - Panasonic INDUSTRY PAN9028 Integration Manual


PAN9028 Wi-Fi/Bluetooth Module

10 Regulatory and Certification Information

10.1 Federal Communications Commission (FCC) for US

10.1.1 FCC Notice
The PAN9028, including the ceramic antenna (ENWF9408A1EF and
ENWF9408A2EF), and the antennas, which are listed in
Antenna
The device meets the requirements for modular transmitter approval as detailed in FCC public
Notice DA00-1407. This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
The FCC identifier for ENWF9408A1EF is FCC ID: T7V9028.
The FCC identifier for ENWF9408A2EF is FCC ID: T7V9028.
10.1.2 Caution
The FCC requires the user to be notified that any changes or modifications
made to this device that are not expressly approved by
Panasonic Industrial Devices Europe GmbH may void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
There is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on.
Module Integration Guide Rev. 1.0
List, complies with Part 15 of the FCC Rules.
10 Regulatory and Certi
10.1.5 Approved
Page 28 of 45