Real Spirit Advanced Pure Air Mini UV Owner's Manual page 8

HOW TO USE
Manual mode:
Press the [Air Flow Speed Select] button after the start or in any other mode,
it will operate in manual mode. In this mode, the corresponding speed
indicator will light and the unit will run at the selected speed. You can
change the speed by pressing the [Air Flow Speed Select ] button.
UVC Light Indicator
This light will remain on at all times.
Timer function:
Press the [TIMER] button and it will go into the timer mode. In this mode you
can set the specific time between 0.5-24hrs to automatically switch off the
unit. The set time will be indicated on the display.
Stop function:
If you want to switch off the unit completely press the [Power] button, the
unit will switch off and all lights will go off.
Filter reset button function:
Press this button when starting up, the button lamp light and the display will
show the residual life of filter "%," 3 seconds later, it will turn back on. When
the filters need to changed, the button light will blink. After replacing filters,
press this button for 5 seconds to reset. You will also need to do this when
the 5050 UV does not operate. It allows you to "re-boot" the filter reset, and
normal function will resume.
www.AdvancedPureAir.com
AIR QUALITY INDICATOR
Blue
Green
Purple
Red
Excellent
Good
Average
Poor
6
1-888-601-5886