Subscribe to Our Youtube Channel
Related Manuals for Baumr-AG SX62
Summary of Contents for Baumr-AG SX62
- Page 1 Petrol-Powered Chainsaw – SX62 User Manual RETAIN THIS MANUAL FOR FUTURE REFERENCE PLEASE READ THIS MANUAL CAREFULLY BEFORE USE Click to Watch: Setting Up Your Chainsaw...
-
Page 2: Table Of Contents
Petrol-Powered Chainsaw – SX62 Table of Contents Parts List ....................................1 Warning Labels ..................................2 Symbols on the Chainsaw ..............................3 Safety Precautions ................................4 Before Using the Chainsaw ..............................4 Working Gears and Clothing ..............................4 Proper Handling of Fuel ................................5 Before Starting the Engine .............................. -
Page 3: Parts List
Petrol-Powered Chainsaw – SX62 Parts List Front guard Throttle lock button Starter knob Engine switch Air cleaner Fuel tank Choke knob Oil tank Throttle interlock Front handle Rear handle Saw chain Throttle trigger Guide bar... -
Page 4: Warning Labels
Petrol-Powered Chainsaw – SX62 Warning Labels Read this manual first before operating the machine. Wear head, eye and ear protection. Use the chain saw with two hands. Warning! Kickback danger. Warning! IMPORTANT! If warning seals peel off or become soiled and impossible to read, you should contact the manufacturer to order... -
Page 5: Symbols On The Chainsaw
Petrol-Powered Chainsaw – SX62 Symbols on the Chainsaw For safe operation and maintenance, symbols are carved in relief on the chainsaw. The port lo refuel “MIX GASOLINE” Position: Fuel tank cap The port to refuel the “CHAIN OIL” Position: Oil cap The indication regarding the switch. -
Page 6: Safety Precautions
Petrol-Powered Chainsaw – SX62 Safety Precautions Before Using the Chainsaw • Read this manual carefully to understand how to operate this chainsaw properly. • You should never use the chainsaw when you are under the influence of alcohol, when suffering from... -
Page 7: Proper Handling Of Fuel
Petrol-Powered Chainsaw – SX62 • Never use the product when wearing pants with loose cuffs, when wearing sandals, or when barefooted. Proper Handling of Fuel • The engine of this chainsaw is designed to run on a mixed fuel which contains highly flammable gasoline. -
Page 8: Kickback Safety Precautions
Petrol-Powered Chainsaw – SX62 Kickback Safety Precautions WARNING! • Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinch the saw chain in the cut. Tip contact in some cases may cause a lightning-fast reverse reaction, kicking the guide bar up and back towards the operator. -
Page 9: Installing The Guide Bar And Saw Chain
Petrol-Powered Chainsaw – SX62 Installing the Guide Bar and Saw Chain IMPORTANT! The chainsaw may come with plastic spacers over or around the bar studs - the spacer is for shipping purposes only and must be removed before mounting the chain bar. After removing the chain brake cover, remove any spacers, then mount the chain bar as described. -
Page 10: Fuel And Chain Oil
Petrol-Powered Chainsaw – SX62 6. While holding up the tip of the bar, adjust the chain tension by turning the tensioner screw until the tie straps just touch the bottom side of the bar rail (F4). 7. Tighten the nuts securely with the bar tip held up (12 ~ 15N.m). Then check the chain for smooth rotation and proper tension while moving it by hand. -
Page 11: Chain Oil
Petrol-Powered Chainsaw – SX62 NOTE: Most engine troubles are caused, directly or indirectly, by the fuel used on the machine. Take special care not to mix a motor oil for 4-cycle engines. Chain Oil Use motor oil SAE# 10W- 30 all year round or SAE #30 - #40 in summer and SAE#20 in winter. - Page 12 Petrol-Powered Chainsaw – SX62 2. Put the switch to “I” position (F8). 3. While holding the throttle lever together with the throttle interlock, push in the side throttle lock button and release the throttle lever to hold it at the starting position (F9).
-
Page 13: Checking The Oil Supply
Petrol-Powered Chainsaw – SX62 5. While holding the saw unit securely on the ground, pull the starter rope vigorously (F11). WARNING! DO not start the engine while hanging the chainsaw with just one hand. The saw chain could touch your body. It's very dangerous! 6. -
Page 14: Adjusting The Carburettor
Petrol-Powered Chainsaw – SX62 The chain oil now can be changed by inserting a screwdriver in the hole at the bottom of the clutch side. Adjust according to your working conditons (F13). (1) Adjuster NOTE: The oil tank should become nearly empty by the time the fuel is used up. Be sure to refill the oil tank every time when refuelling the unit. -
Page 15: Carburettor Anti-Freeze Mechanism
Petrol-Powered Chainsaw – SX62 NOTE: Be sure to adjust the carburettor with the bar chain attached. 1. Stop the engine and screw in both H and L needles until they come to a complete stop. Never force the screw in. then, set them back to the initial number of turns as shown below: H Needle: 1 3/8 L Needle: 1 ¼... -
Page 16: Chain Brake
Petrol-Powered Chainsaw – SX62 WARNING! Continuing to use the chainsaw in anti-freeze mode, even when temperatures have risen and returned to normal, may result in the engine failing to start properly or in the engine failing to operate at its normal speed, and for this reason you should always return the unit to normal operating mode if there is no danger of icing from occurring. -
Page 17: Stopping The Engine
Petrol-Powered Chainsaw – SX62 To release brake, pull up the front guard toward the front handle till a clicking sound is heard. CAUTION: be sure to confirm brake operation on your daily inspections. How to Confirm: 1. Turn off the engine. -
Page 18: Sawing
Petrol-Powered Chainsaw – SX62 Sawing WARNING! • Before proceeding to your work, read the Safety Precautions section first. It is recommended to first practice sawing easy logs. This also helps you get accustomed to your unit. • Always follow the safety regulations. The chainsaw must only be used for cutting wood. -
Page 19: Felling A Tree
Petrol-Powered Chainsaw – SX62 Felling a Tree (1) Notch cut (2) Felling cut (3) Felling direction 1. Decide the felling direction considering the wind, inclination of the tree, location of heavy branches, ease of job after felling and other factors. -
Page 20: Cutting A Log Lying On The Ground
Petrol-Powered Chainsaw – SX62 Cutting a Log Lying on the Ground Saw down halfway, then roll the log over and cut it from the opposite side. Cutting a Log Hanging Off the Ground In area A, saw up from the bottom one-third and finish by sawing down from the top. In area B, saw down from the top one-third and finish by sawing up from the bottom. -
Page 21: Pruning A Standing Tree
Petrol-Powered Chainsaw – SX62 WARNING! Be alert for any limbs springing back towards you while cutting. Pruning a Standing Tree Cut upwards from the bottom, then cut downwards from the top. WARNING! • Do not use an unstable foothold or ladder. - Page 22 Petrol-Powered Chainsaw – SX62 2. Oiling port Dismount the guide bar and check the oiling port for clogging (F26). 3. Guide bar When the guide bar is dismounted, remove any saw dust in the bar groove and the oiling port (F27). Grease up the nose sprocket from the feeding port on the tip of the bar (F28).
-
Page 23: Periodical Service Points
Petrol-Powered Chainsaw – SX62 4. Others Check for fuel leakage and loose fastenings and damages to major parts, especially handle joints and guide bar mounting. If any defects are found, have them repaired before operating the chainsaw again. Periodical Service Points 1. -
Page 24: Maintenance Of Saw Chain And Guide Bar
Petrol-Powered Chainsaw – SX62 3. Sprockets Check for cracks and for excessive wear that are interfering with the chain drive. If cracks and worn parts are found, replace them with new ones. Never fit a new chain on a worn sprocket, or a worn chain on a new sprocket. - Page 25 Petrol-Powered Chainsaw – SX62 Cutter Setting Standards WARNING! Be sure to wear safety gloves. Before filing: • Ensure that the saw chain is held securely. • Ensure that the engine has come to a complete stop. • Use a round file of a proper size for your chain.
- Page 26 Petrol-Powered Chainsaw – SX62 WARNING! Be sure to round off the front edge to reduce the chance of kickbacks or tie-trap breakage. Make sure that every cutter has the same length and edge angles as illustrated (F34). (4) Cutter length...
-
Page 27: Guide Bar
Petrol-Powered Chainsaw – SX62 Guide Bar • Reverse the bar occasionally to prevent partial wear. • The bar rail should always be a square. Check for wear of the bar rail. Apply a ruler to the bar and the outside of a cutter. If a gap is observed between them, the rail is normal. Otherwise, the rail is worn out and needs to be corrected or replaced (F35). -
Page 28: Specifications
Petrol-Powered Chainsaw – SX62 Specifications Engine Type Petrol EURO 2 -2 Stroke Commercial Maximum Power 4.5Hp (peak) Displacement 62cc Maximum Engine Speed 11,000 RPM Ignition Type Bar Type Sprocket Nose Bar Length 20" Fuel Tank Capacity 550mL Fuel Type Regular Unleaded 95+ RON... - Page 29 Some experts believe that the incorrect or prolonged use of almost any product may cause serious injury or death. To help reduce your risk of serious injury or death, refer to the information below. For more information, see www.datastreamserver.com/safety ...
Need help?
Do you have a question about the SX62 and is the answer not in the manual?
Questions and answers