Common Usage Problems - NewAir NCH840BK00 Owner's Manual

COMMON USAGE PROBLEMS

You can resolve most common usage problems easily by reviewing and
following the troubleshooting information below.
Problem
The humidor will
not operate.
The humidor is not
cold enough.
The light does not
work.
The humidor
vibrates while
operating.
www.newair.com
Possible Causes
The unit may be plugged in
using a different voltage.
The circuit breaker may be
tripped or there is a blown
fuse.
The external environment
may require a higher
setting.
The door may be opened
too frequently.
The door is not closed
completely.
The door seal does not
seal properly.
The humidor does not
have sufficient clearance.
There may be a problem
with the display board.
The unit is not sitting on a
level floor, or the unit's
feet are not correctly
installed.
Solution
Check if using the wrong
voltage.
Reset the circuit breaker or
check for a broken fuse.
Lower the temperature of
the humidor.
Open the door less
frequently.
Make sure the door is
closed securely.
Replace the seal on the
door. Replacements can be
acquired from the NewAir
customer support
department.
Make sure there is at least
5 inches clearance
between the back of the
unit and any adjacent
walls.
Contact the NewAir
customer support
department.
Make sure the unit's feet
are in the proper position
and tightened securely.
EN
22