Subscribe to Our Youtube Channel
Related Manuals for Sensus 461-S
Summary of Contents for Sensus 461-S
- Page 1 RM-1330 R7 RM-1330 R8 Models 461-S, 461-8S and 461-12S Regulators Regulators Installation and Maintenance Instructions...
- Page 2 Installation and Maintenance Instructions Model 461-S, 461-8S, and 461-12S Regulator Regulator Models 461-S, 461-8S, and 461-12S are excellent Installation and Start-Up general purpose gas pressure regulators for intermediate and Thoroughly purge inlet piping to remove dirt and debris that could larger loads.
- Page 3 Inspect each one carefully The unions for the control lines of the 461-S models contain a and replace those that are worn or damaged or otherwise small orifice (approximately 1/16"...
- Page 4 On 461-8S release adjustment 3a and remove cover 5, button 7a, and spring 9. button 7a, and spring 9. On 461-S release adjustment 3a and remove cover 8, On 461-S release adjustment 3a and remove cover 8, button 7b, and spring 9.
- Page 5 Make sure travel indicator 45 is working. Tighten Temperature Limits bolts 23-22 evenly. The regulator models 461-S, 461-12S, and 461-8S can be used Insert spring 9. Be sure it nests correctly into part 11b. for flowing temperatures from -20°F to 150°F.
- Page 6 Installation and Maintenance Instructions Model 461-S, 461-8S, and 461-12S Regulator Condensed Parts List Condensed Parts List All Models All Models Illustration Part Illustration Part Number Description Number Number Description Number Valve Stem, stainless, for Set Screw, slotted headless cup 091-00-016-07 907694 1”...
- Page 7 Maximum Emergency Pressures Other Gases For complete Maximum Emergency Pressure information for The regulator models 461-S, 461-12S, and 461-8S are mainly used Model 461 Regulators, refer to bulletin RDS-1498, Regulator on natural gas services; however, these regulators will Pressure Ratings. If the maximum outlet pressure is exceeded, perform equally well on other gases.
- Page 8 (iii) used or incorporated with other materials or equipment, after buyer or anyone using the Goods has, or reasonably should have, knowledge of any defect or nonconformance of the Goods; or (iv) manufactured, This document is for informational purposes only, and SENSUS MAKES NO EXPRESS WARRANTIES IN THIS DOCUMENT. FURTHERMORE, THERE ARE NO IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, fabricated or assembled by anyone other than Seller, (c) shall not be effective unless buyer notifies Seller in writing of any purported defect or nonconformance with (thirty days) after Buyer discovers or should have WARRANTIES AS TO FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY.
Need help?
Do you have a question about the 461-S and is the answer not in the manual?
Questions and answers