Set The Lower Left And Lower Right Horizontal Position - NEC CHIEF K3F220 Installation Manual

Set the Lower Left and Lower Right Horizontal Position

Three people are needed for adjusting the horizontal position of the monitors One person to hold the spacer between
monitors, one to hold the center-side of the arm to keep the arm steady, and one to make the adjustments
Ⓕ
1. Loosen knob on the back to adjust the horizontal
position
Ⓑ
2. Loosen hex screw
3. Loosen hex screws
angle
4. Place a spacer on the side of the lower-center
monitor
5. Move the lower left monitor towards the center
monitor
6. Adjust the height and angle of the center monitor
7. Tighten all hex screws and the knob
VESA plate
8. Remove the spacer
9. Repeat steps 1-8 for the lower-right monitor
for adjusting the arm height
Ⓒ Ⓖ
& for adjusting the arm
Ⓑ
Ⓔ
on the
3 x 2 mUlti-monitoR installation (K3g320) | 30
Ⓕ
Ⓖ
Ⓔ
CHIEF STAND INSTALLATION MANUAL | USER'S GUIDE
Ⓒ