1. Manuals
  2. Brands
  3. Sentinel Manuals
  4. Food Warmer
  5. PA2026
  6. User manual

Sentinel PA2026 User Manual

Chip warmer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CHIP WARMER USER MANUAL
Model：PA2026/PA2046
Please read and keep these instructions.
This chip warmer is manufactured for commercial use only and is not intended for
residential use.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PA2026 and is the answer not in the manual?

Questions and answers

Related Manuals for Sentinel PA2026

Summary of Contents for Sentinel PA2026

  • Page 1 CHIP WARMER USER MANUAL Model：PA2026/PA2046 Please read and keep these instructions. This chip warmer is manufactured for commercial use only and is not intended for residential use.

  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION WARNING: Do not store any flammable liquids in the vicinity of this or any other electric appliances. Keep the area free and clear of combustible materials WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the manual thoroughly before using or servicing this equipment.

  • Page 3: Standard Features

    STANDARD FEATURES Model # PA2026 holds 26 gallons of chips Model # PA2046 holds 46 gallons of chips  Door opens creating a shelf for scooping chips  Sloping front of unit allows secure closure and easy opening  Wide top opening doors for easy loading of chips ...

  • Page 5: Identification Of Key Parts

    IDENTIFICATION OF KEY PARTS ① Upper door ② Lower door ③ Power switch ④ Thermostat ⑤ Power cord ⑥ Adjustable feet...

  • Page 6: Electric Diagram

    ELECTRIC DIAGRAM...

  • Page 7: Electrical Requirements

    INSTALLATION AND PLACEMENT OF YOUR CHIP WARMER 1. Chip warmers are assembled and inspected before leaving the factory. 2. After unpacking the warmer you will only need to install the legs. 3. To install legs, carefully tip Chip Warmer onto its side. Screw legs into pre-drilled holes and return warmer to the upright position 4.
  • Page 8 OPERATING INSTRUCTIONS 1. Verify that the chip warmer is connected to the correct power source. 2. The lighted power switch is located on right back side of the chip warmer. Switch power switch to ON position. Verify that the switch illuminates. 3.

  • Page 9: Troubleshooting

    TROUBLE SHOOTING SYMPTOM POSSIBLE REASON REMEDY Chip warmer Chip warmer not plugged into Plug chip warmer into correct operating power source. power source as indicated on serial data plate. Lighted power switch not in ON Press power switch to ON position.

This manual is also suitable for:

Pa2046

Table of Contents