Advertisement
TROUBLESHOOTING
If you have issues connecting the camera to the account, power cycle the
camera and try again.
If issues persist, reset the camera to factory defaults. Press and hold the
Reset button located on the bottom of the camera until the LED is flashing
Green and Red (about 15 seconds), then release the button. The camera
will reboot with factory defaults.
If the camera was previously installed to a Frontpoint account, it
!
will need to be deleted before it can be installed again.
FOR ADDITIONAL HELP, CALL CUSTOMER CARE
AT 1-877-602-5276
10
11
Advertisement
Need help?
Do you have a question about the Outdoor Camera and is the answer not in the manual?