Frontpoint Outdoor Camera Get Started page 5

LED REFERENCE GUIDE
STATUS
Green | Solid
Internet connection—Local network and Internet
connection
Green | Flashing
Local network connection—Local network
connection only, no Internet
Red | Solid
No network connection—No local network or Internet
connection
Red | Flashing
System booting—Camera is booting
8
LED REFERENCE GUIDE
WIRELESS ENROLLMENT
Blue | Flashing
WiFi Protected Setup—To enter WiFi Protected Setup
(WPS), push the WPS button and release when flashing
blue (about 3 seconds). See instructions above to add
the camera to your router and account using WiFi
Protected Setup.
White | Flashing
Standard WiFi Mode—To enter Standard WiFi Mode
(AP), push the WPS button and release when flashing
white (about 6 seconds). See instructions above to add
the camera to your router and account using Standard
WiFi Mode (AP).
Red & Green | Flashing
Factory Reset—To perform a factory reset, push the
WPS button and release when flashing Green and Red
(about 15 seconds).
Warning: This will restore factory-default settings to the camera.
! If already installed, the camera may need to be removed from the
Frontpoint account and re-added after a factory reset.
FOR ADDITIONAL HELP, CALL CUSTOMER CARE
AT 1-877-602-5276
9