CPS G-210 Operator's Manual
  1. Manuals
  2. Brands
  3. CPS Manuals
  4. Grinder
  5. G-210
  6. Operator's manual

CPS G-210 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for CPS G-210

Summary of Contents for CPS G-210

  • Page 2 Contact Information Concrete Polishing Solutions PO Box 520 Norris, TN 37828 877.472.8200 www.go2cps.com...

  • Page 3: General Information

    If an item was delivered to you in error, please let CPS know and the item will be picked up at CPS’ expense. If your order contains a shortage, report the shortage no later than 24 hours after receiving your shipment.
  • Page 4 CPS can send you the parts to help you service your own equipment over the phone. In many locations, CPS can vide the information of a service person in your area who will be happy to assist you with parts and service.

  • Page 5: Special Symbols

    SAFETY This operator’s manual vides instructions for safe, efficient, and trouble-free operation of your machine. You and anyone else who will be using or maintaining the machine are required to read and understand the information contained in this manual. Owners and operators must keep the owner’s manual available for frequent reference.
  • Page 6 Do not allow children on or near the machine. • Those with impaired mental, physical, or sensory abilities should not operate the machine. Concrete Polishing Solutions machines should be used only in the manner CPS recommends. Anyone using the G-210 should know about: • Machine Functions •...
  • Page 7 Be sure to place hands in the center of handlebars when lowering and raising the machine. The placement increases stability and reduces the risk of machine tilting 3.1 Storage Store your CPS grinder in an area that is dry. Cold or damp conditions can damage the grinder.

  • Page 8: Machine Information

    CPS grinders are equipped to handle various types of jobs, including surface preparation, grinding, and polishing of concrete flooring. The G-210 is equipped with one grinding head upon which plates and tooling for different applications can be attached. For more information on CPS tooling visit http://www.go2cps.com/tooling.html...

  • Page 9: Machine Diagram

    Machine Diagram...

  • Page 10: Control Panel

    4.2 Control Panel Reverse To operate machine in reverse, press button toward REV. Forward To operate machine in forward motion, press button toward FWD. Speed Potentiometer The speed dial should be started at the lowest setting when starting the machine. Gradually increase speed to desired rate.

  • Page 11: Operating The Machine

    The following information is intended to vide you with general instruction on how to perly operate your G-210 machine. Be sure to follow all workplace safety regulations and rules when operating the machine. Training in per techniques and methods is available through CPS and its distributors.
  • Page 12 5.3 Attaching the Vacuum Hose If dry-grinding, be sure to attach the vacuum hose to your G-210D machine before beginning any work. Follow all workplace safety requirements when wet or dry-grinding. WARNING • Dust from grinding can be dangerous and damaging to the lungs.

  • Page 13: Starting The Machine

    6.0 Starting the Machine Starting the Electric Machine 1. Adjust handlebars to the desired height. 2. If dry grinding, hook machine hose to vacuum for dust removal. 3. Locate the power cord for your electric grinder. 4. Plug machine into appropriate power source. 5.

  • Page 14: Maintenance

    MAINTENANCE CPS Machines are meant to be low-maintenance for the owner/operator, though there are some important routine maintenance that should be done. See the Maintenance Checklist below for more information. Be sure to follow all workplace safety procedures when performing maintenance.

  • Page 15: Troubleshooting

    All repairs for CPS machines must be completed by a CPS authorized service technician. Contact CPS or your retailer to locate certified service centers. Repairs must be completed by trained specialists, authorized by CPS to complete machine repairs. Failure to use a certified...
  • Page 16 The plate for the CPS G-210 grinder is a 21” plate. 21 “Metal Bond Plate APMF6203K 9.2 Tooling There are many applicable tools for the G-210 machine. From tools perfect for surface prep to www.go2cps.com/tooling.html polishing resins, CPS has you covered. Visit for more.
  • Page 17 10.0 MAINTENANCE INDEX In this section, you will find instructions for the most common routine maintenance procedures. For any other issues or maintenance your machine requires, call CPS or your retailer to find a certified service technician in your area.

Table of Contents