Table of Contents
Advertisement
5
6
1. Assemble Rear Cover and
Middle Frame according to
the sequence as the picture
showed
2. Lock 4 Rear Cover screws
To attach the monitor stand:
1.
Follow the
instructions on the flaps of
carton to remove the stand
from the top cushion that
secures it.
2.
Insert the stand
base blocks fully into the
stand slot.
3.
Lift the screw
handle and turn the screw
clockwise.
4.
After fully
tightening the screw, fold the
screw handle flat within the
recess.
5.
Attach the stand
assembly to the monitor.
a. Fit the two tabs on the
upper part of the stand to
the groove on the back of
the monitor.
b. Press the stand down till it
snaps into place.
- 13 -
Philips-head
screwdriver
Torsion of RC
screw: 9±1Kgf
Advertisement
Table of Contents
