Advertisement
2. Instant initial cloning
Instant initial cloning allows you to copy all TV channels and settings without going
through the installation wizard. After creating a `masterclone file` on one `master tv`,
configuring the channel installation and all settings to be applied, instant initial cloning
can be done as follows:
1. Copy the masterclone file out of the master tv on a formatted usb device. This can
be done into the professional menu (319753mute) selecting `copy to usb`
2. On all other tv`s, during the first step of the installation wizard, (language
selection) insert the USB flash drive into the usb side connector.
3. Press the
GREEN
the USB flash drive.
4. Select the folder which contains the cloning data which needs to be applied. After
selecting the folder press OK to start the upgrade process.
5. TV will display the OSD message the cloning data was uploaded and TV will reset.
6. When the process is complete, the TV will restart and display the switch ON
channel.
7. Remove the usb device, the tv is now configured with the new
settings/channellist.
8. Done
PASSWORD
TO UNZIP THE SOFTWARE FILE
2017-170224
For technical support:
https://philipshtv.supportsystem.com
button on the remote and TV set will display the folder view of
:
Advertisement
