Table of Contents
Advertisement
en Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Controls
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching on the fan settings
Switching the fan run-on on or off
Resetting the odour filter saturation indicator
Resetting the grease filter saturation indicator
Switching the lighting on or off
Setting the brightness
6 Basic operation
6.1 Switching on the appliance
Press
.
▶
a The appliance starts at fan setting 2.
6.2 Switching off the appliance
Press
.
▶
6.3 Setting a fan setting
To set a higher fan setting, turn the control ring
1.
clockwise.
To set a lower fan setting, turn the control ring anti-
2.
clockwise.
a The selected fan setting appears on the display.
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
To switch on intensive mode 1, turn the control ring
1.
clockwise until
appears on the display.
6
5.2 Display
You can see the current setting values in the display.
Grease filter saturation indicator
Odour filter saturation indicator
-
Fan settings
Duration of the run-on
/
Intensive modes 1/2
To switch on intensive mode 2, turn the control ring
2.
clockwise until appears on the display.
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
6.5 Switching off intensive mode
Turn the control ring anti-clockwise.
▶
6.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
Press
.
▶
a The remaining fan run-on time appears on the dis-
play.
a The fan run-on starts at fan setting 1.
a The appliance switches off automatically after ap-
prox. 10 minutes.
Advertisement
Table of Contents
