Main Parts - Stihl FS 111 Instruction Manual

English
ating and maintenance instructions in this man‐
ual. This includes in particular:
– Alterations or modifications to the product not
approved by STIHL.
– Using tools or accessories which are neither
approved or suitable for the product or are of a
poor quality.
– Using the product for purposes for which it
was not designed.
– Using the product for sports or competitive
events.
– Consequential damage caused by continuing
to use the product with defective components.
27.1 Maintenance Work
All the operations described in the "Maintenance
Chart" must be performed on a regular basis. If
these maintenance operations cannot be per‐
formed by the owner, they should be performed
by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
If these maintenance operations are not carried
out as specified, the user assumes responsibility
for any damage that may occur. Among other
parts, this includes:
– Damage to the engine due to neglect or defi‐
cient maintenance (e.g. air and fuel filters),
incorrect carburetor adjustment or inadequate
cleaning of cooling air inlets (intake ports, cyl‐
inder fins).
– Corrosion and other consequential damage
resulting from improper storage.
– Damage to the machine resulting from the use
of poor quality replacement parts.
27.2 Parts Subject to Wear and Tear
Some parts of the power tool are subject to nor‐
mal wear and tear even during regular operation
in accordance with instructions and, depending
on the type and duration of use, have to be
replaced in good time. Among other parts, this
includes:
– Cutting attachments (all types)
– Mounting hardware for cutting attachments
(rider plate, nut, etc.)
– Deflectors for cutting attachments
– Clutch
– Filters (air, fuel)
– Rewind starter
36
– Spark plug
– Antivibration elements

28 Main Parts

9
8
10
11
13
14
21
12
19
15
20
21
1 Tank cap
2 Carburetor adjusting screw
3 Starter grip
4 Manual fuel pump
5 Cover
6 Muffler
7 Machine support
8 Throttle trigger
9 Stop switch
10 Throttle trigger lockout
11 Bike handle (handlebar)
12 Handle support
13 Wing screw
14 Throttle cable retainer
15 Carrying ring
16 Choke knob
17 Air filter cover
18 Fuel tank
19 Loop handle
20 Barrier bar (country specific)
21 Drive tube
# Serial Number
28 Main Parts
4
5
3
2
6
1
#
7
16
17
15
14
18
9
10
8
0458-430-0121-B